| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Holes in headstock need plugs http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10137&t=49443 |
Page 1 of 1 |
| Author: | clarkleach [ Mon Jun 05, 2017 8:57 am ] |
| Post subject: | Holes in headstock need plugs |
I bought a Strat with a Warmoth neck that someone butchered by poorly adding Sperzel tuners and string trees. One of the pin holes for the Sperzels was actually drilled all the way through; there's another set of holes from some previous tuners. Anyways, long story short, I want to plug these holes. Does anyone know of a source for small - i.e. 1/8" - side (face) grain plugs I can get? Birdseye maple would be ideal but maple would probably work equally well. |
|
| Author: | Chris Pile [ Mon Jun 05, 2017 9:33 am ] |
| Post subject: | Re: Holes in headstock need plugs |
Just use toothpicks like most of us do. Think of them as small paper birch dowels, just like their larger diameter lumber yard cousins. |
|
| Author: | david farmer [ Mon Jun 05, 2017 10:47 am ] |
| Post subject: | Re: Holes in headstock need plugs |
If you motivated, you can make a plug cutter out of 1/8" id tubing from the hardware store. The difference in appearance between an end grain dowel and a face grain maple plug will be small and, IMHO, not worth the trouble on a previously chewed Warmoth neck. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|