| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Tenor Guitar Bridge Needed http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10137&t=49472 |
Page 1 of 1 |
| Author: | Grandpa G [ Thu Jun 15, 2017 11:07 am ] |
| Post subject: | Tenor Guitar Bridge Needed |
Hi All, I am thinking of converting a Harmony H150 "Studio Special" guitar into a 4 steel string baritone ukulele. The instrument comes with the old screw on bridge. I am looking for someone to make a simple 4 string pin bridge. I could provide a plan. (.5" string spacing) Thanks in advance, Grandpa G |
|
| Author: | johnparchem [ Thu Jun 15, 2017 12:16 pm ] |
| Post subject: | Re: Tenor Guitar Bridge Needed |
Are you looking for a classical shaped ukulele bridge? If so How can you go wrong for 6.95 [url] https://www.amazon.com/A2860-Ukulele-Ro ... ele+bridge[/url] Stewmac has one you can drill yourself or one with 13.6 mm. http://www.stewmac.com/Hardware_and_Parts/All_Hardware_and_Parts_by_Instrument/Ukulele_Parts/Bridges/Ukulele_Bridge_with_Saddle.html Neither exactly .5" but close. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|