| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| 47 or 48 Gibson L1 someone "worked" on UGGGGGGGGGG http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10137&t=51092 |
Page 1 of 1 |
| Author: | WudWerkr [ Wed Oct 10, 2018 10:58 am ] |
| Post subject: | 47 or 48 Gibson L1 someone "worked" on UGGGGGGGGGG |
Guy brought me this for " Restoration" Gibson L1 late 40's Apparently it has been worked on before . Very Very poorly i might add . You will see areas that have " Fiberglass " that has been applied and finished over to try and blend it together . ![[headinwall]](./images/smilies/headbangwalluf8.gif "Mad") ENJOY !!!!!!!!!!! Attachment: gibson l1.jpg Attachment: gibson l1 a.jpg Attachment: gibson l1 d.jpg Attachment: gibson l1 g.jpg Attachment: gibson l1 h.jpg Attachment: gibson l1 i.jpg Attachment: gibson l1 j.jpg Attachment: gibson l1 k.jpg
|
|
| Author: | Haans [ Wed Oct 10, 2018 12:11 pm ] |
| Post subject: | Re: 47 or 48 Gibson L1 someone "worked" on UGGGGGGGGGG |
Give it back! |
|
| Author: | WudWerkr [ Wed Oct 10, 2018 12:34 pm ] |
| Post subject: | Re: 47 or 48 Gibson L1 someone "worked" on UGGGGGGGGGG |
Haans wrote: Give it back! Sad isnt it ..... |
|
| Author: | Haans [ Wed Oct 10, 2018 1:01 pm ] |
| Post subject: | Re: 47 or 48 Gibson L1 someone "worked" on UGGGGGGGGGG |
It's dead, Jim... |
|
| Author: | WudWerkr [ Wed Oct 10, 2018 1:04 pm ] |
| Post subject: | Re: 47 or 48 Gibson L1 someone "worked" on UGGGGGGGGGG |
Haans wrote: It's dead, Jim... ![[uncle]](./images/smilies/surrenderflagqv6.gif "Uncle")
|
|
| Author: | Glen H [ Wed Oct 10, 2018 5:22 pm ] |
| Post subject: | Re: 47 or 48 Gibson L1 someone "worked" on UGGGGGGGGGG |
Ditto. My first reaction exactly |
|
| Author: | B. Howard [ Fri Oct 12, 2018 7:15 am ] |
| Post subject: | Re: 47 or 48 Gibson L1 someone "worked" on UGGGGGGGGGG |
I've saved worse..... Is that just the remnants of a stinger painted on there or was a new headstock grafted on? |
|
| Author: | WudWerkr [ Fri Oct 12, 2018 9:33 am ] |
| Post subject: | Re: 47 or 48 Gibson L1 someone "worked" on UGGGGGGGGGG |
B. Howard wrote: I've saved worse..... Is that just the remnants of a stinger painted on there or was a new headstock grafted on? It appears that half of the neck was coated over with fiberglass and finished over to blend in . Whats under the fiberglass is only a guess . If you look carefully at the picture of the neck by the headstock you will see where the "webbing" of the fiber glass wasnt coated and covered . I have never been one that would shy away from a challenge ! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|