Sorry I had to start a new thread to attach the photo. Looks like a patch there previously and the x loose. Crack runs out from x beside finger brace.
Sent from my SM-J600FN using Tapatalk
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Internal shot of cedar crack http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10137&t=55104 |
Page 1 of 1 |
| Author: | mike-p [ Sun Jun 26, 2022 9:55 am ] |
| Post subject: | Internal shot of cedar crack |
Sorry I had to start a new thread to attach the photo. Looks like a patch there previously and the x loose. Crack runs out from x beside finger brace. Sent from my SM-J600FN using Tapatalk |
|
| Author: | joshnothing [ Sun Jun 26, 2022 3:44 pm ] |
| Post subject: | Re: Internal shot of cedar crack |
In terms of fixing the brace, you need to get into that gap between X brace and soundboard and clean out any old dry glue and dirt. Feeler gauges with sandpaper stuck on can help, or I often use cut up bits of old worn out dozuki saw plate - they’re thin and the teeth have minimal set and scrape glue out well. Then you can slide glue in there (again, use something like a feeler gauge to work it into the gap), clamp and clean up. Then proceed as Barry advised in your other thread. |
|
| Author: | mike-p [ Sun Jun 26, 2022 4:11 pm ] |
| Post subject: | Re: Internal shot of cedar crack |
Brilliant thankyou, I've been failing to get started on this out of fear (well, and lack of time!) For ages now. I picked that little patch off with my fingernail. Brace first, then patch the crack! This is my sister's and she's currently without a guitar so she'll be so pleased. Sent from my SM-J600FN using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|