Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
Thicknessing the Plates http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10146&t=48744 |
Page 1 of 1 |
Author: | ericschaeferguitars [ Fri Dec 23, 2016 3:50 pm ] |
Post subject: | Thicknessing the Plates |
[youtube]https://www.youtube.com/watch?v=VxKi65RhkY8[/youtube] |
Author: | Alain Lambert [ Mon Dec 26, 2016 2:26 pm ] |
Post subject: | Re: Thicknessing the Plates |
Unprotected mooving parts and long sleeves is a good receipe for an injury! |
Author: | jshelton [ Mon Dec 26, 2016 6:43 pm ] |
Post subject: | Re: Thicknessing the Plates |
Alain Lambert wrote: Unprotected mooving parts and long sleeves is a good receipe for an injury! Not to mention sanding without a dust mask. |
Author: | Pmaj7 [ Tue Dec 27, 2016 3:33 pm ] |
Post subject: | Re: Thicknessing the Plates |
Yeah, that exposed drum and loose long sleeves is scary. Stay safe! |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |