| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Making the Rosette http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10146&t=48745 |
Page 1 of 1 |
| Author: | ericschaeferguitars [ Fri Dec 23, 2016 3:51 pm ] |
| Post subject: | Making the Rosette |
| Author: | truckjohn [ Sun Dec 25, 2016 8:47 pm ] |
| Post subject: | Re: Making the Rosette |
Thanks for posting your process on this. I have struggled with how to do a good precise job on a wooden tiled rosette. Your process looks very straight forward. Question - is your jig available commercially? That's a nice setup. Thanks |
|
| Author: | ericschaeferguitars [ Mon Dec 26, 2016 2:09 pm ] |
| Post subject: | Re: Making the Rosette |
truckjohn wrote: Thanks for posting your process on this. I have struggled with how to do a good precise job on a wooden tiled rosette. Your process looks very straight forward. Question - is your jig available commercially? That's a nice setup. Thanks Yes, it is. I sell it as a kit with a book, and some materials. http://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/ Stewart Macdonald, also will be coming out with their version sometime in 2017. From when I last spoke to them it sounded like Spring. |
|
| Author: | truckjohn [ Sat Jan 07, 2017 1:46 pm ] |
| Post subject: | Re: Making the Rosette |
I followed your basic directions on a multi-piece rosette for my 2016 OLF challenge build. It works very well. I appreciate your jig even more now. It would probably have taken me well under half the time with the jig... |
|
| Author: | ericschaeferguitars [ Sun Jan 08, 2017 1:17 am ] |
| Post subject: | Re: Making the Rosette |
truckjohn wrote: I followed your basic directions on a multi-piece rosette for my 2016 OLF challenge build. It works very well. I appreciate your jig even more now. It would probably have taken me well under half the time with the jig... Glad to hear it, John! Post a picture or a link to the forum page if it's already on the forum elsewhere. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|