My first attempt At Inlay

Board index » Forum Archive

All times are UTC - 5 hours

My first attempt At Inlay

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

psl53

Post subject:

Posted: Fri Jun 22, 2007 10:04 am

Cocobolo

Joined: Tue Mar 20, 2007 3:45 pm
Posts: 206
Location: United States

Well I made my first attempt at inlay and it didn't come out too bad, I'm happy. All in all it was a learning experience. I have a little cleaning to do tomorrow right now I have the fingerboard glued to the neck and it will set for now. I made this out of shells I picked up on a beach in Mexico.

Peter

Top

WaddyThomson

Post subject:

Posted: Fri Jun 22, 2007 10:09 am

Contributing Member

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro

Cool! Nice job.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars

Top

Dave Anderson

Post subject:

Posted: Fri Jun 22, 2007 10:14 am

Brazilian Rosewood

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States

Good Job Peter! I like it.

_________________
Anderson Guitars
Clearwater,Fl. 33755

Top

LaurieW

Post subject:

Posted: Fri Jun 22, 2007 10:15 am

Contributing Member

Joined: Wed Apr 25, 2007 8:39 am
Posts: 515
Focus: Build
Status: Amateur

Very nice indeed and with your own shells - even better!

Laurie

_________________
____________________________________
Time you enjoy wasting is not wasted time.

Top

KenH

Post subject:

Posted: Fri Jun 22, 2007 12:07 pm

Brazilian Rosewood

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida

Nice job! Inlaying in rosewood is always harder than ebony because you cant hide the over cuts as easily. Having made the inlay from shells yo0u gathered yourself is just a really big plus in my book!

_________________
Reguards,

Ken H

Top

Lillian F-W

Post subject:

Posted: Fri Jun 22, 2007 1:30 pm

Koa

Joined: Fri Jun 30, 2006 4:23 pm
Posts: 1694
Location: United States
First name: Lillian
Last Name: Fuller-Watson
State: WA
Country: USA
Focus: Build
Status: Amateur

Nice job Peter.
How hard was it to process the shell yourself?

You wouldn't happen to be from Oklahoma would you?

_________________
Aoibeann

Top

psl53

Post subject:

Posted: Fri Jun 22, 2007 1:43 pm

Cocobolo

Joined: Tue Mar 20, 2007 3:45 pm
Posts: 206
Location: United States

For not knowing what I was doing, not too bad. I had collected quite a bit, I had this idea for a while. My design is as simple as it gets. I just selected a semi flat piece and started sanding. Once it was relatively flat I cut it with a jewelers saw. Again the pieces were small and simple I think that was the key.

Peter

Top

old man

Post subject:

Posted: Fri Jun 22, 2007 2:26 pm

Brazilian Rosewood

Joined: Mon Jul 04, 2005 7:13 am
Posts: 3270
Location: United States

I think that's an excellent first attempt!! I'm with Todd, when the finish hits it, it will really pop. Great job.

Ron

_________________
OLD MAN formerly (and formally) known as:

Ron Wisdom

Somewhere in the middle of Arkansas......

Top

Page 1 of 1

[ 10 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:

Official Luthiers Forum!

My first attempt At Inlay

Who is online