Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

purfling question

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

James W B

Post subject:

Posted: Thu Jun 28, 2007 9:24 am

Koa

Joined: Sat Jul 01, 2006 5:55 am
Posts: 1392
Location: United States
First name: James
Last Name: Bolan
City: Nashville
State: Tennessee
Country: USA

I`ve had trouble with purflings wanting to twist when applied below the bindings on the sides of the guitar.Especially in the waist.I`d like to pre bend these.They are just your typical B/W/B commercial purfs.Can I glue them to the wood bindings with CA and then bend in the bender or how do some of you folks do this? & nbsp; James

_________________
James W Bolan
Nashville Tennessee

Top

burbank

Post subject:

Posted: Thu Jun 28, 2007 9:37 am

Koa

Joined: Mon Sep 12, 2005 12:40 am
Posts: 1900
Location: Spokane, Washington
First name: Pat
Last Name: Foster
State: Eastern WA
Focus: Build

That's what I've done. Works well.

I run a thin line of CA along one seam.

_________________
now known around here as Pat Foster
_________________
http://www.patfosterguitars.com

Top

burbank

Post subject:

Posted: Thu Jun 28, 2007 9:39 am

Koa

Joined: Mon Sep 12, 2005 12:40 am
Posts: 1900
Location: Spokane, Washington
First name: Pat
Last Name: Foster
State: Eastern WA
Focus: Build

Also, after gluing, tape pairs together tightly every few inches so the purfling strips get pressed against each other, then cook 'em in the bender.

_________________
now known around here as Pat Foster
_________________
http://www.patfosterguitars.com

Top

LanceK

Post subject:

Posted: Thu Jun 28, 2007 9:45 am

Site Admin

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro

Jim, I use the b/w/b Fine Multi-Line Purfling - Double Length that LMI sells, its fiber. They readily bend around the waist with no problems at all.

Quick Link

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com

Top

Wayne Clark

Post subject:

Posted: Thu Jun 28, 2007 9:50 am

Cocobolo

Joined: Thu Jun 23, 2005 9:36 am
Posts: 381
Location: United States
First name: Wayne
Last Name: Clark
City: Driftwood
State: TX
Focus: Build
Status: Amateur

I do pretty much the same, although I use titebond instead of CA. I didn't want to risk gluing my fingers together while fussing with the purfling.

_________________
53% of all statistics are made up on the spot
http://driftwoodguitars.blogspot.com/

Top

James W B

Post subject:

Posted: Thu Jun 28, 2007 10:10 am

Koa

Joined: Sat Jul 01, 2006 5:55 am
Posts: 1392
Location: United States
First name: James
Last Name: Bolan
City: Nashville
State: Tennessee
Country: USA

Lance that`s the same purf I use and I`ve had a little trouble.Must be the operator.
James

_________________
James W Bolan
Nashville Tennessee

Top

Bob Long

Post subject:

Posted: Thu Jun 28, 2007 1:53 pm

Koa

Joined: Mon Oct 23, 2006 1:46 am
Posts: 588
Location: Is this heaven? "No, it's Iowa."

I titebond the purf to the binding, sand them to .080, tape them together, just a little water, wrap them in aluminum foil, put em in the bender.

Long

_________________
"No man ever steps in the same river twice, for it's not the same river and he's not the same man.” -Heraclitus of Ephesus

Top

James W B

Post subject:

Posted: Thu Jun 28, 2007 2:09 pm

Koa

Joined: Sat Jul 01, 2006 5:55 am
Posts: 1392
Location: United States
First name: James
Last Name: Bolan
City: Nashville
State: Tennessee
Country: USA

The titebond holds okay under heat?
James

_________________
James W Bolan
Nashville Tennessee

Top

Jim Watts

Post subject:

Posted: Thu Jun 28, 2007 2:35 pm

Contributing Member

Joined: Thu May 12, 2005 5:46 am
Posts: 2969
Location: United States

I use titebond 3 for this operation as it's and it holds up great under the bending process, better than CA in my experience.
I've also noticed that the double length stuff that LMI sells has a tendancy to twist. I think it may be due to the coiling of it when they ship it. I like it though.

_________________
Jim Watts
http://jameswattsguitars.com

Top

Arnt Rian

Post subject:

Posted: Thu Jun 28, 2007 6:14 pm

Contributing Member

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway

When using the “Fine Multi-Line Purfling” that Lance mentions, I find it easier to install it at the same time as the binding and top prufling, but without gluing anything together first. I tape the whole top or back binding / purfling up, adjust any miters or gaps or whatever until everything fits, then lightly hit it with CA glue. These purflings are so pliable that they will not buckle if they sit tightly between the binding and the rabbet, even when bent sideways in the a tight waist area.

_________________
Rian Gitar og Mandolin

Top

Page 1 of 1

[ 10 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: