Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 5:50 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 33 posts ]  Go to page 1, 2  Next
Author Message
 Post subject:
PostPosted: Wed Aug 22, 2007 5:50 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas


This is a coffee cup full of little aluminum fret levelers. It is such a simple tool, no one has put a picture up until now. I have one ten inch, one four inch, the rest are all 6 and 8 inches.

They slide under the string at tension to level the frets and progress through the grits to get 'em smooth. Evan and Rick had a couple threads going which talk about them. This is just a visual aid for slow learners like me.......   



Just release the truss rod to flat then you begin your efforts to level sand the frets under full string tension. as Evan said: It's so fast it's scary. You may want to start out on an old junker before moving to your nice hand-builts.







Refer to the other two threads for details. I used some 6" Mirka sanding discs to get the grit I needed. Rick uses rolls to get the length needed.

_________________
http://www.dickeyguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 5:59 am 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
Yep, that's it. Thanks, Bruce.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 6:04 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
I still don't get it. Why worry about the truss rod with such a short leveler?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 6:15 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
It makes sense that if you're trying to level, start with a level surface. It
takes a few seconds to adjust the rod, so why not?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 6:42 am 
Offline
Koa
Koa

Joined: Sat Dec 03, 2005 4:35 am
Posts: 728
Location: United States
Awesome Bruce, what depth cup do you use to hold these and do you think the material of the cup affects the tone?
How is that for over thinking?
Best, Evan

_________________
http://www.NewYorkGuitarRepair.com


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 8:49 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Mar 20, 2007 3:45 pm
Posts: 206
Location: United States

[QUOTE=Evan Gluck]Awesome Bruce, what depth cup do you use to hold these and do you think the material of the cup affects the tone?
How is that for over thinking?
Best, Evan[/QUOTE]



Peter



Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 9:18 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Hesh, you've got it. Use a straight edge along the fretboard to make sure
it's level before fretting.

I'm not sure I understand the question about seeing a description of the
entire procedure using the levelers. Do you mean using the levelers
themselves, or the steps you posted?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 12:57 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
Hesh, I simply point you to the comment Rick made in the other thread. Just do it.   

I think the reason no one ever posted pics is that they are almost self-explanatory.

Once I made them, it was a real let down to actually use them. All the mystery was gone! I can now level anyfret anywhere anyhow!

Couple this with my old Stanley #5 body wrapped in sandpaper to level fretboards before fretting and geeze, necks, fretboards and leveling is a breeze.

Matter of fact this is somewhat of the feeling I get when all the planets align. Oh my.

_________________
http://www.dickeyguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 1:00 pm 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
Too much thinking...

The Force...the Force!


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 1:37 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
Ahhhh, Star Wars.

"Use the Force Luke, use the Force!"

Okay, on that one I'm retiring to my bed, my pillow, my kevers and me pooch asleep by me feets.

_________________
http://www.dickeyguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 2:03 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 04, 2005 7:13 am
Posts: 3270
Location: United States
I have another question, please:

On a new guitar, do you do this right after stringing it up or would it make sense to leave the guitar strung up to full tension for a couple of weeks to see if it has settled down?

Ron

_________________
OLD MAN formerly (and formally) known as:

Ron Wisdom

Somewhere in the middle of Arkansas......


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 2:36 pm 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
Ron, if you can afford to have a guitar hang around for a couple of weeks, then yes, it makes sense to do this when the guitar has gotten used to being a guitar...a little bit. I'm generally in a place where it has to ship within a couple of days of getting strung up.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 2:38 pm 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
But then I've only been posting here for a couple of months, so you should probably disregard what I have to say... :-)


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 8:08 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jun 13, 2005 6:53 am
Posts: 2104
Location: Toronto, Ontario, Canada
First name: Anthony
Last Name: Zlahtic
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
[QUOTE=Rick Turner] But then I've only been posting here for a couple of months, so you should probably disregard what I have to say... :-)[/QUOTE]

I haven't been online or posting much of late but I can assure you Rick that when I do pop on, I've been looking for your posts. I really appreciate you being here!

Bruce -- great pictures! Hesh thanks for breaking down the steps with your question. I think I got it!! Thanks


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 23, 2007 1:10 am 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 17, 2006 3:52 am
Posts: 1263
City: Lawrence
State: Kansas
Zip/Postal Code: 66047
Status: Amateur
[QUOTE=Evan Gluck] Awesome Bruce, what depth cup do you use to hold these and do you think the material of the cup affects the tone?
Best, Evan[/QUOTE]
Evan, I don't think you or Bruce have thought this through. This is the only cup you should use to store the fret levelers in. It,s the proper depth and the material is guaranteed to improve the sound of anu guitar.

_________________
Say what you do, Do what you say.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 23, 2007 2:47 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
Actually, I dug the cup in question out of the trash.

It was my favorite coffee cup.

No one told me it got broken, but the handle was missing.

And one more piece of trash in the bucket, it would have been gone forever. I would not have see it.

So, that cup has sentimental value and I will ease it down to the shop today to find it's place on my cluttered bench, along with the little turner fret levelers.

By the way Rick. Did you know you have a link on my website and have had for years, along with a few others? www.dickeyguitars.com Oh and while I'm at it. That picture of you at Healdsburg, gosh I had no idea you were so handsome, a lady killer!   

_________________
http://www.dickeyguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 23, 2007 3:20 am 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 17, 2006 3:52 am
Posts: 1263
City: Lawrence
State: Kansas
Zip/Postal Code: 66047
Status: Amateur
Is the the official name for these "The little Turner fret levelers"? I like it. It has a nice ring to it. Hope thats okay with Mr Turner.

_________________
Say what you do, Do what you say.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 23, 2007 4:26 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Nov 11, 2005 3:32 am
Posts: 2683
Location: Ithaca, New York, United States
Hesh, one thing I'm pretty sure Rick said in one of the other threads is that, on a new guitar, he levels the frets before stringing it up (as the rest of us have already been doing). Then he strings it up and uses these "Turner fret levelers" to do a final leveling, if necessary. My understanding was that he sometimes finds it's not necessary to do it at all, i.e. that the frets check out level when the string tension is on and the truss rod is adjusted to re-straighten the neck.     

_________________
Todd Rose
Ithaca, NY

https://www.dreamingrosesecobnb.com/todds-art-music

https://www.facebook.com/ToddRoseGuitars/


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 23, 2007 4:56 am 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 17, 2006 3:52 am
Posts: 1263
City: Lawrence
State: Kansas
Zip/Postal Code: 66047
Status: Amateur
"Turner Fret levelers" it is

_________________
Say what you do, Do what you say.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 23, 2007 5:00 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
No guys, Little Turner Fret Levelers.

The 3/4" ones he mentioned of course would appropriately be "Big Little Turner Fret Levelers". Most likely to be used on a bass guitar.

I've also learned something that will apply to my old Stanley 5 Plane body that I use for leveling fretboards ala Frank Ford. PSA (peel and stick adhesive sandpaper)

It's the simple things we learn hanging out together that are so valuable.

_________________
http://www.dickeyguitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 33 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 61 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com