Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Worth it?

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

SkyHigh

Post subject: Worth it?

Posted: Thu Apr 10, 2008 8:12 am

Cocobolo

Joined: Fri Nov 16, 2007 6:06 am
Posts: 329

Hi Guys!

Saw this for $50 as I'm still looking around for drill press. Yes, being a newbie this will be my first drill press. What do you guys think? good buy or not?

Todd, What do you think?

David

Top

Bruce Dickey

Post subject: Re: Worth it?

Posted: Thu Apr 10, 2008 8:34 am

Brazilian Rosewood

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas

Does it work?

I have no opinion, usually comparison shop.

I love older, quality tools.

I paid $125 twenty years ago for an old Craftsman, great machine.

I use them for flycutting soundholes and drilling tuner holes square.

And you can make a pencil holder out of a block of wood in a jiffy. Grin....

Others use them for buffing out finishes, and fly-thicknessing wood with a wagner power planer....

_________________
http://www.dickeyguitars.com

Top

Mike Mahar

Post subject: Re: Worth it?

Posted: Thu Apr 10, 2008 8:47 am

Koa

Joined: Sun Jan 02, 2005 1:38 pm
Posts: 1105
Location: Amherst, NH USA
Focus: Build
Status: Amateur

Yes if the motor spins and the bits don't wobble. This drill press will be worth $50 for the next ten years. You can always sell it for that when/if you get a new one.

Top

Hesh

Post subject: Re: Worth it?

Posted: Thu Apr 10, 2008 8:52 am

Old Growth Brazilian Rosewood

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13388
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional

But it's.........dirty.........

Top

JimWomack

Post subject: Re: Worth it?

Posted: Thu Apr 10, 2008 9:04 am

Contributing Member

Joined: Sun May 13, 2007 10:28 pm
Posts: 404
Location: Clermont, FL
Focus: Build

If it runs smoothly, doesn't have any slop at the chuck, and of course you have room for it... go for it. Have you priced any floor/production model presses? Fifty bucks is a steal.

_________________
Jim Womack

"Be thankful we're not getting all the government we're paying for. "
Will Rogers

Top

Billy T

Post subject: Re: Worth it?

Posted: Thu Apr 10, 2008 12:25 pm

Brazilian Rosewood

Joined: Sun Dec 25, 2005 7:58 pm
Posts: 2946
Location: United States

It's solid! Buy it! These old Deltas are great!

_________________
Billy Dean Thomas
Covina, CA

"Multi famam, conscientiam, pauci verentur."
(Many fear their reputation, few their conscience)

Top

douglas ingram

Post subject: Re: Worth it?

Posted: Thu Apr 10, 2008 1:33 pm

Koa

Joined: Wed Sep 26, 2007 12:55 am
Posts: 1505
Location: Lorette, Manitoba, Canada

For $50...you have to ASK? wow7-eyes

_________________
Expectation is the source of all misery; comparison the thief of joy.
http://redrivercanoe.ca/

Top

Steve Walden

Post subject: Re: Worth it?

Posted: Thu Apr 10, 2008 5:25 pm

Contributing Member

Joined: Sat Jul 28, 2007 1:03 pm
Posts: 724
Location: NE Oklahoma, United States
First name: Steve
Last Name: Walden
City: Bartlesville
State: Oklahoma
Zip/Postal Code: 74006
Country: USA
Focus: Build
Status: Amateur

Hesh wrote:

But it's.........dirty.........

Did I hear Hesh volunteering to clean it??? bliss

Buy the thing. Even if minor problems you can probably get parts to fix em form Sears.....

_________________
Steve Walden
Aspiring Builder,
Bartlesville, OK

Top

Anthony Lembo

Post subject: Re: Worth it?

Posted: Sat Apr 12, 2008 9:31 am

Mahogany

Joined: Fri Jan 25, 2008 10:25 am
Posts: 57
Location: Northeast Ohio
First name: Anthony
Last Name: Lembo
Country: United States
Focus: Build

Yes. Buy it.

Worst case scenario - arbor press for fretting, or use it (manually) to keep a tap or ream square to your part. [:Y:]

_________________
Anthony J. Lembo
Lembo Custom Guitars - www.Lemboguitars.com

Top

L. Presnall

Post subject: Re: Worth it?

Posted: Mon Apr 14, 2008 2:43 pm

Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States

JimW wrote:

If it runs smoothly, doesn't have any slop at the chuck, and of course you have room for it... go for it. Have you priced any floor/production model presses? Fifty bucks is a steal.

But, if you steal it...you'll save FIFTY BUCKS! beehive

(That was a J-O-A-K...DON'T steal it! And yes, it's a good deal if it drills straight and the hole's the same size as the bit!)

_________________
http://www.presnallguitars.com

Top

Page 1 of 1

[ 11 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 59 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: