***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Feb 22, 2025 11:22 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
Chris aka Sniggly
PostPosted: Sun Oct 05, 2008 12:32 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Feb 18, 2008 10:01 pm
Posts: 1655
Location: Jacksonville Florida
First name: Chris
City: Jacksonville
State: Florida
Focus: Build
Status: Amateur
I am soon to put finish on my first build. It's only going to be a rubbed oil of some sort. My question is do I attach the bridge first...or mark out the location of the bridge...tape off...then finish...then attach the bridge? Or do I just finish the body including the area where the bridge will be and just attach the bridge over it.

My furniture experience tells me to tape the bridge area off....or attach the bridge first then finish as a whole piece, but I have seen gloss finishes on guitars on this forum where the body was finished entirely and then the bridge was attached.

?????

_________________
There is no difference between the man that thinks he can....and the man that thinks he cannot.
Top
 Profile  
 
stan thomison
PostPosted: Sun Oct 05, 2008 1:51 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jan 03, 2005 7:46 am
Posts: 1315
Location: Branson, MO
First name: stan
Last Name: thomison
City: branson
State: mo
Zip/Postal Code: 65616
Country: united states
Focus: Build
Status: Professional
I locate the bridge position, tape it and then we finish. When I first started, I just finished and know othere folks who do the finish and then determine where bridge goes and then have to scrape or route (done both) the finish off the bridge area. Why do the extra work to get to wood when don't have to go there in the first place. Never have or personally worked with anyone who sets the bridge first, but sure it is done by someone, somewhere.
Top
 Profile  
 
Howard Klepper
PostPosted: Sun Oct 05, 2008 1:54 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692
Don't use one of the "Danish" or "hand rubbed" oil finishes.

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.
Top
 Profile  
 
Link Van Cleave
PostPosted: Sun Oct 05, 2008 3:36 pm 
Offline
Contributing Member
Contributing Member

Joined: Wed Mar 19, 2008 11:49 am
Posts: 897
Location: Northen Cal.
Howard,
Why ?
Link

_________________
Cut to size.....Beat to fit.....Paint to match.
Top
 Profile  
 
Steve Sollod
PostPosted: Mon Oct 06, 2008 8:57 am 
Offline
Mahogany
Mahogany

Joined: Fri Jan 25, 2008 9:08 am
Posts: 99
Use tru-oil... Easy to apply... nice finish... bliss
Top
 Profile  
 
ChuckH
PostPosted: Mon Oct 06, 2008 9:29 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jan 24, 2008 8:01 am
Posts: 1399
Location: Houston, TX
First name: Chuck
Last Name: Hutchison
City: Houston
State: Texas
Country: United States
Focus: Build
Status: Amateur
Steve Sollod wrote:
Use tru-oil... Easy to apply... nice finish... bliss


Wouldn't the first couple coats of Tru-Oil soak into the wood and saturate it causing a damping effect? I could see maybe using it on the neck but not the soundboard if it does saturate the wood. I have a bottle of it but never used it.

_________________
"After forty-nine years of violin building, I have decided that the search for a varnish is similar to the fox hunt. The fun is in the hunt."
Jack Batts Maker and Repairer of Fine Violins
Top
 Profile  
 
Colin S
PostPosted: Mon Oct 06, 2008 9:48 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2005 7:29 am
Posts: 3840
Location: England
ChuckH wrote:
Steve Sollod wrote:
Use tru-oil... Easy to apply... nice finish... bliss


Wouldn't the first couple coats of Tru-Oil soak into the wood and saturate it causing a damping effect? I could see maybe using it on the neck but not the soundboard if it does saturate the wood. I have a bottle of it but never used it.


Just put a couple of coats of shellac on first.

Colin

_________________
I don't believe in anything, I simply make use of a set of reasonable working hypotheses.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com