Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 11:45 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Mon May 20, 2013 10:34 am 
Offline
Walnut
Walnut

Joined: Mon May 20, 2013 10:08 am
Posts: 1
Location: Europe
First name: Dave
Last Name: Frost
Hello Everyone!

Image

I've bought an epiphone les paul and as you can see on the picture above, there is a small defect on 11th fret. I don't know if it is lacquer or some kind of glue but it is shiny. :roll: Could you recommend me something to clean it with? Thank you very much! :)


Top
 Profile  
 
PostPosted: Mon May 20, 2013 12:35 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur
Get a razor blade and scrape it off (the flat type razor blades from the paint and wallpaper shop)
Just hold the blade vertically and scrape gently until its gone. A little fingerboard oil will help show if you got it all.


Top
 Profile  
 
PostPosted: Mon May 20, 2013 4:27 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
me may be wrong but that looks like glue dribble that should have been cleaned off way back when...it may also be in the grain of the wood.

If its glue, a razor blade will scrape it off ...however you will be exposing fresh wood and then end up scraping the whole board just to mach the freshly exposed grain and.... if its in the grain of the wood ...well you still might end up scraping the whole board just to match the exposed newly exposed grain... you hear what me is saying?


So the question is..."what impact does this have on the sonics?" Right! So now the question becomes...is all that scraping gonna make it sound any better to your eyeballs?

just saying...


blessings
duh ?adma

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.



.


Top
 Profile  
 
PostPosted: Tue May 21, 2013 4:33 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
That fret board is likely finished. Most import guitars have some type of thin, hard polymer finish. So whatever it is, it is most likely under the finish. Scraping at it may make matters worse.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com