Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 2:46 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Magnets
PostPosted: Mon Jan 20, 2020 10:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 20, 2010 11:20 pm
Posts: 502
Location: Kurtistown, Hawaii
First name: Bob
Last Name: Gleason
City: Kurtistown
State: Hawaii
Zip/Postal Code: 96760
Country: USA
Focus: Build
Status: Amateur
I admit to being easily pleased by simple ideas. I recently sold a large old wide belt sander that I'd had for nearly 20 years. It had miserable door latches. My new sander works great, but the door latches are just plain stupid. A friend mentioned just using a magnet instead of the latch. I first placed the magnet near the latch and the door was nearly impossible to open, but I moved it to where it is in the photo and it holds just right. Works great and I'm sure would be great on a lot of metal doors. Not a new idea, but new to me.


You do not have the required permissions to view the files attached to this post.

_________________
“ The meaning of life is to find your gift and the purpose of life is to give it away” Pablo Picasso



These users thanked the author Pegasusguitars for the post (total 2): Pmaj7 (Mon Jan 20, 2020 11:41 pm) • Michaeldc (Mon Jan 20, 2020 10:47 pm)
Top
 Profile  
 
 Post subject: Re: Magnets
PostPosted: Mon Jan 20, 2020 11:43 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
Bob, what kind of sander did you get?


Pat

_________________
Pat


Top
 Profile  
 
 Post subject: Re: Magnets
PostPosted: Thu Jan 23, 2020 9:14 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
I used a magnet to do the opposite. When the lifting spring gave out on the door of the washer/dryer I placed a magnet on the bottom of the dryer to hold the top loading washer door open (when loading clothes) until I could get a new spring. It worked so well I didn't bother to replace the spring! bliss


Top
 Profile  
 
 Post subject: Re: Magnets
PostPosted: Thu Jan 23, 2020 9:59 am 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 3076
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
I love insetting those round rare earth magnets into wooden jigs and such. An appropriately sized Forstner bit set at the right depth on the drill press, a little CA glue, and Bob's your uncle. Very handy.

One thing to watch out for: Wear and tear. Those little magnets are not invulnerable. They can chip if they get dinged.


Top
 Profile  
 
 Post subject: Re: Magnets
PostPosted: Thu Jan 23, 2020 10:09 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
Yes, they are very handy! You do have to watch out for them inadvertently picking up stuff. Many times I thought that I had lost some screws or Allen wrenches, but they were stuck to a magnet somewhere.

Pat

_________________
Pat



These users thanked the author Pmaj7 for the post: Michaeldc (Thu Jan 23, 2020 10:48 am)
Top
 Profile  
 
 Post subject: Re: Magnets
PostPosted: Thu Jan 23, 2020 12:27 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 20, 2010 11:20 pm
Posts: 502
Location: Kurtistown, Hawaii
First name: Bob
Last Name: Gleason
City: Kurtistown
State: Hawaii
Zip/Postal Code: 96760
Country: USA
Focus: Build
Status: Amateur
Pat- After a lot of dithering, I bought a Shop Fox 20". I had a 24" Sunhill for at least 20 years and a 24" Kuster before that. The Shop Fox has shorter belts, 48" as opposed to 75" on the previous machines, but that has not been a problem. Belt wear is still acceptable. I've used it extensively since I got it in November and it's doing well. I like it.--Bob

_________________
“ The meaning of life is to find your gift and the purpose of life is to give it away” Pablo Picasso



These users thanked the author Pegasusguitars for the post: Pmaj7 (Thu Jan 23, 2020 2:17 pm)
Top
 Profile  
 
 Post subject: Re: Magnets
PostPosted: Thu Jan 23, 2020 8:49 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sun Feb 27, 2005 10:11 am
Posts: 2173
Hi Bob,

I have the Grizzly 18" which has the same stupid door latches-I will have to try the magnets great idea!


Top
 Profile  
 
 Post subject: Re: Magnets
PostPosted: Fri Jan 24, 2020 6:59 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4905
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
I used the tape magnets on my grizzly

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 50 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com