***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Dec 01, 2024 5:46 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
SnowManSnow
 Post subject: Is this bearing ok?
PostPosted: Thu Jun 25, 2020 6:48 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
I just got this in from stewmac ... it’s a router bearing for binding and such, but it looks like it’s missing some of the bearing or something... the other side looks like the others
Thoughts?
Image


Sent from my iPhone using Tapatalk
Top
 Profile  
 
Barry Daniels
 Post subject: Re: Is this bearing ok?
PostPosted: Thu Jun 25, 2020 7:28 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Looks like the outer part is just extended.


These users thanked the author Barry Daniels for the post: SnowManSnow (Thu Jun 25, 2020 10:11 pm)
Top
 Profile  
 
SnowManSnow
 Post subject: Re: Is this bearing ok?
PostPosted: Thu Jun 25, 2020 10:11 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
Barry Daniels wrote:
Looks like the outer part is just extended.

At any rate I don’t think it’s right unless they changed designs for some reason. It’s the same
Height as my other bearings


Sent from my iPhone using Tapatalk
Top
 Profile  
 
surveyor
 Post subject: Re: Is this bearing ok?
PostPosted: Sun Jun 28, 2020 9:25 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Dec 28, 2013 10:06 am
Posts: 256
First name: Mike
Last Name: Spector
City: ORANGE
State: TX
Zip/Postal Code: 77632
Country: USA
Focus: Build
Status: Amateur
I've never seen one like that. Try it on a piece of scrap. If it's no good you'll know directly.
Top
 Profile  
 
Clay S.
 Post subject: Re: Is this bearing ok?
PostPosted: Sun Jun 28, 2020 10:03 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
I have a couple of bearings that have a similar construction, but they are used on each end of a small spindle. The way that bearing is made it looks like it would either catch debris or interfere with the cutter,or if mounted the other way make it difficult to tighten the retaining screw with a pair of pliers (I often use pliers in lieu of the usual hex key) But if those actually are non issues the bearing might be O.K.
Top
 Profile  
 
Colin North
 Post subject: Re: Is this bearing ok?
PostPosted: Sun Jun 28, 2020 10:13 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5498
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Why not ask SM?

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.
Top
 Profile  
 
rbuddy
 Post subject: Re: Is this bearing ok?
PostPosted: Sun Jun 28, 2020 10:52 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 486
First name: Brian
City: U.P.
State: Michigan
Focus: Build
Too bad all the bearings don't have an extended collar. Sometimes it's a close call getting the bearings to run against the body when routing purfling shoulders when the binding channel is cut first. I prefer doing it in that order because I feel it helps reduce potential tearout of the spruce by taking less meat.

Brian

_________________
Brian R, Wood Mechanic
N8ZED
Top
 Profile  
 
SnowManSnow
 Post subject: Re: Is this bearing ok?
PostPosted: Sun Jun 28, 2020 11:14 am 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
Colin North wrote:
Why not ask SM?

I have
Their cs lis slow lately


Sent from my iPhone using Tapatalk
Top
 Profile  
 
Colin North
 Post subject: Re: Is this bearing ok?
PostPosted: Sun Jun 28, 2020 4:54 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5498
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
SnowManSnow wrote:
Colin North wrote:
Why not ask SM?

I have
Their cs lis slow lately


Sent from my iPhone using Tapatalk

Weekend too.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.
Top
 Profile  
 
Freeman
 Post subject: Re: Is this bearing ok?
PostPosted: Sun Jun 28, 2020 7:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2150
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
I recently (3 months ago) ordered a new set of their binding router bearings and none of them look like that.
Top
 Profile  
 
phavriluk
 Post subject: Re: Is this bearing ok?
PostPosted: Sun Jun 28, 2020 11:07 pm 
Offline
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 1042
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
I think the suggestion to contact SM was a suggestion to pick up the phone and ask. I think email is easy to stack up and reply when convenient.

_________________
Peter Havriluk
Top
 Profile  
 
SnowManSnow
 Post subject: Re: Is this bearing ok?
PostPosted: Thu Jul 02, 2020 5:34 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
phavriluk wrote:
I think the suggestion to contact SM was a suggestion to pick up the phone and ask. I think email is easy to stack up and reply when convenient.

Thanks
:) call them
All their ca is via email right now

All that said they did respond and another is on the way


Sent from my iPhone using Tapatalk


These users thanked the author SnowManSnow for the post: Colin North (Thu Jul 02, 2020 5:41 pm)
Top
 Profile  
 
doncaparker
 Post subject: Re: Is this bearing ok?
PostPosted: Thu Jul 02, 2020 5:38 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 3076
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
SM is pretty invested in customer service. If you are not happy with something, they will do a lot to make it right.
Top
 Profile  
 
SnowManSnow
 Post subject: Re: Is this bearing ok?
PostPosted: Thu Jul 02, 2020 8:06 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
doncaparker wrote:
SM is pretty invested in customer service. If you are not happy with something, they will do a lot to make it right.

It’s always been my experience too


Sent from my iPhone using Tapatalk
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 25 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com