***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 10:32 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 2 of 2
  [ 30 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Darrel Friesen
PostPosted: Tue Mar 02, 2021 7:39 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 24, 2007 2:45 pm
Posts: 1336
Location: Calgary, Canada
Status: Amateur
Barry Daniels wrote:
50 clamps had a material cost of about $150 and it took me about a week to build. It was quite a project but I am glad I bit the bullet and got it done. I felt like I had given every other method a fair chance and they all had short comings. The thing that really forced me to go this route was building a replacement body for a 1931 Martin O-18 that had no bindings. I wanted zero gaps on the joints since they were exposed.


Not sure how you cut the mortises for the bars on your cam clamps, but after having built a lot, I found it super easy to cut the mortises on my table saw using a tenon jig and then filling the back of the mortise with a glued in spacer. Very quick compared to how I originally did them. Hope that makes sense.
Top
 Profile  
 
Darrel Friesen
PostPosted: Tue Mar 02, 2021 7:49 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 24, 2007 2:45 pm
Posts: 1336
Location: Calgary, Canada
Status: Amateur
SteveSmith wrote:
A lot of us use fiberglass rods. I've been using mine for over 10 years and never had one break. Mine are 3/16" and came from a kite supply store. They provide about 7 lbs of force each. Get the rubber tips too if you go this route.

Sent from my SM-G970U using Tapatalk

I picked up a bunch of 7/16" x 5/16" x 24" fiberglass bars at a LeeValley sale a lot of years ago for $0.60 each on sale. I have a bag of cork bits I use with them and have been too lazy to rubber tip or anything yet. Best go bars ever according to me. :)
Top
 Profile  
 
Clay S.
PostPosted: Wed Mar 03, 2021 12:05 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
I use a go bar deck for several things, but for gluing on backs I sometimes use pipe insulation.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Barry Daniels
PostPosted: Wed Mar 03, 2021 11:41 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Darrel Friesen wrote:
Not sure how you cut the mortises for the bars on your cam clamps, but after having built a lot, I found it super easy to cut the mortises on my table saw using a tenon jig and then filling the back of the mortise with a glued in spacer. Very quick compared to how I originally did them. Hope that makes sense.


Darrel, that makes perfect sense and has some similarity to my method. I built up with 3 layers of 1/4" baltic birch plywood. Lots of little pieces of plywood and spacers to deal with but the process was kind of fun.
Top
 Profile  
 
Michael Lloyd
PostPosted: Wed Mar 03, 2021 4:39 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Sep 25, 2006 12:46 pm
Posts: 413
Location: Toronto, Canada
First name: Michael
Last Name: Lloyd
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
I started using some UHMW 3/8" as clamping aids. Cut to the sharp of the guitar body with a 1/4" overhang. Works very well and allows me to clamp more consistently with both pressure and overall surface area. I could effectively reduce the number of clamps.


You do not have the required permissions to view the files attached to this post.

_________________
Michael Lloyd

“I was born to ignorance, yes, and lesser poverties ...
I was born to privilege that I did not see ... I didn’t know it, but my way was paved” – John Gorka
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 30 posts ]  Go to page Previous  1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot] and 49 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com