Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Volute making

Page 1 of 1

[ 5 posts ]

Print view

Previous topic | Next topic

Author

Message

frwilliams

Post subject: Volute making

Posted: Fri Jun 17, 2022 3:36 pm

Mahogany

Joined: Mon Sep 22, 2008 6:27 pm
Posts: 76

So how do you make a volute on the back of the guitar neck head? Any good jig ideas?

Top

jfmckenna

Post subject: Re: Volute making

Posted: Fri Jun 17, 2022 3:43 pm

Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia

Check out this very simple jig. If not self explanatory then ask.

https://www.tiktok.com/t/ZTdK2TuVu/?k=1

These users thanked the author jfmckenna for the post: frwilliams (Sat Jun 18, 2022 6:53 am)

Top

J De Rocher

Post subject: Re: Volute making

Posted: Fri Jun 17, 2022 11:08 pm

Contributing Member

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2524
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington

Check out this recent thread for some ideas: http://luthiersforum.com/forum/viewtopic.php?f=10101&t=54680&hilit=volute+carve

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter

These users thanked the author J De Rocher for the post: frwilliams (Sat Jun 18, 2022 6:53 am)

Top

Freeman

Post subject: Re: Volute making

Posted: Sat Jun 18, 2022 10:47 am

Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2150
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur

Assuming you are talking about the Martin dart style of volute, mine is a small piece glued on to my scarf joined neck

Attachment:

IMG_0943-1.jpg

Attachment:

IMG_0949-1.jpg

Attachment:

IMG_0957-1.jpg

You do not have the required permissions to view the files attached to this post.

These users thanked the author Freeman for the post: frwilliams (Sun Jun 19, 2022 7:19 am)

Top

Casey Cochran

Post subject: Re: Volute making

Posted: Sun Jun 19, 2022 4:36 pm

Contributing Member

Joined: Thu Oct 07, 2010 5:28 pm
Posts: 687
First name: Casey
Last Name: Cochran
City: Gainesville
State: GA
Zip/Postal Code: 30501
Country: USA
Focus: Build

I’ve been working on this one. It’s designed to ride in the dado of a table saw. The knobs adjust the thickness of the peg head for paddle or slot head. The neck attaches with screws using the same holes that were used for the peg head template. After the two cuts are made, a hand saw will be used to separate the waste before carving the volute.

Sent from my iPhone using Tapatalk

_________________
Good judgement comes from experience. Experience comes from poor judgement.

These users thanked the author Casey Cochran for the post: frwilliams (Thu Jun 23, 2022 6:54 am)

Top

Page 1 of 1

[ 5 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: