Titebond II or Titebond III

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Titebond II or Titebond III

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Bill Higgs

Post subject: Titebond II or Titebond III

Posted: Sat Jun 08, 2024 10:26 pm

Cocobolo

Joined: Mon May 26, 2008 2:31 pm
Posts: 259
Location: Conway, Arkansas

Gluing some purfling to some binding before bending them in a hot sidebending jig.
Which one (Titebond II or Titebond III) takes the heat bending better.
I've done this before, but I can't remember which one I used.

_________________
Formerly know as Mandodiddle.

Top

Jim Watts

Post subject: Re: Titebond II or Titebond III

Posted: Sat Jun 08, 2024 10:46 pm

Contributing Member

Joined: Thu May 12, 2005 5:46 am
Posts: 2968
Location: United States

Titebond III. Works great for this application.

_________________
Jim Watts
http://jameswattsguitars.com

These users thanked the author Jim Watts for the post (total 2): Pmaj7 (Sun Jun 09, 2024 3:41 pm) • Kbore (Sun Jun 09, 2024 10:56 am)

Top

SteveSmith

Post subject: Re: Titebond II or Titebond III

Posted: Sun Jun 09, 2024 7:25 am

Contributing Member

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7375
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair

Jim Watts wrote:

Titebond III. Works great for this application.

Same here

_________________
Steve Smith
"Music is what feelings sound like"

These users thanked the author SteveSmith for the post (total 2): Pmaj7 (Sun Jun 09, 2024 3:41 pm) • Kbore (Sun Jun 09, 2024 10:56 am)

Top

Duct Tape

Post subject: Re: Titebond II or Titebond III

Posted: Sun Jun 09, 2024 1:03 pm

Mahogany

Joined: Thu Jan 12, 2017 6:14 am
Posts: 84
First name: Jon
Last Name: Snider
City: Colorado Springs
State: Colorado
Focus: Build
Status: Amateur

Second try, first post disappeared into cyber world.

I laughed when I saw this thread. Just bent Ebony bindings with side red purfling on the Fox bender that I glued up last night. With TB3. Went great.

These users thanked the author Duct Tape for the post: Pmaj7 (Sun Jun 09, 2024 3:41 pm)

Top

meddlingfool

Post subject: Re: Titebond II or Titebond III

Posted: Sun Jun 09, 2024 7:02 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7377
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional

TB3 too here…

Top

Terence Kennedy

Post subject: Re: Titebond II or Titebond III

Posted: Sun Jun 09, 2024 9:29 pm

Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3388
Location: Alexandria MN

Here also.

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.

Top

maarten_van_guyse

Post subject: Re: Titebond II or Titebond III

Posted: Wed Jun 12, 2024 1:47 am

Walnut

Joined: Wed Oct 25, 2023 1:36 am
Posts: 9
First name: Maarten
Last Name: Van Guyse
Country: Belgium
Focus: Build
Status: Semi-pro

I can't comment on the difference between TB II or III, but I use HHG for glueing up bindings and purfling. HHG will only release with heat AND moisture, so it works great for this application too.

_________________
http://www.vanguyseguitars.com

These users thanked the author maarten_van_guyse for the post: doncaparker (Wed Jun 12, 2024 6:03 am)

Top

Page 1 of 1

[ 7 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: CraigG and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:

Official Luthiers Forum!

Forum rules

Titebond II or Titebond III

Who is online