Gibson J45 Body Thickness

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Gibson J45 Body Thickness

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

Mike OMelia

Post subject: Gibson J45 Body Thickness

Posted: Sat Jun 29, 2024 2:46 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

At heel and tail block. Anybody know? Modern J45. For tail I see variations between 4 5/8, 4 3/4, 4 7/8, But mostly 4 5/8

Top

ballbanjos

Post subject: Re: Gibson J45 Body Thickness

Posted: Sat Jun 29, 2024 3:33 pm

Koa

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1028
Location: Newland, North Carolina
First name: Dave
Last Name: Ball

My early 70's J45 measures 4 at the heel and 4 7/8 at the tail.

Dave

Top

meddlingfool

Post subject: Re: Gibson J45 Body Thickness

Posted: Sat Jun 29, 2024 4:48 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7379
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional

My blueprints of a 1957 show 4” at neck, 5” at tail…

Top

SteveSmith

Post subject: Re: Gibson J45 Body Thickness

Posted: Sat Jun 29, 2024 6:45 pm

Contributing Member

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7376
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair

Here's some measurements from a '49 J-45. Neck block was 3 3/4"H x 3 1/4"W x 1 5/16"D, Tail block 4 5/8"H x 3 1/4"W x 3/4"D. Grain direction same as the sides. Here's a sheet of measurements I did in case someone might find it useful.

Attachment:

49 Gibson J45.pdf

You do not have the required permissions to view the files attached to this post.

_________________
Steve Smith
"Music is what feelings sound like"

These users thanked the author SteveSmith for the post (total 2): bftobin (Mon Jul 01, 2024 1:07 pm) • bcombs510 (Sat Jun 29, 2024 11:03 pm)

Top

Kbore

Post subject: Re: Gibson J45 Body Thickness

Posted: Sun Jun 30, 2024 4:17 pm

Koa

Joined: Thu Jan 11, 2018 9:19 am
Posts: 528
Location: St. Charles MO
First name: Karl
Last Name: Borum
State: MO
Zip/Postal Code: 63303
Country: United States
Focus: Build
Status: Amateur

ballbanjos wrote:

My early 70's J45 measures 4 at the heel and 4 7/8 at the tail.

Dave

My 70's J-45 is about the same but 4 15/16 at the tail.

_________________
Measure Twice,

Karl Borum

Top

Mike OMelia

Post subject: Re: Gibson J45 Body Thickness

Posted: Thu Jul 04, 2024 10:30 am

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

OK, thanks, The tail seems somewhat consistent through time. I think I saw some variation in the heel block 3.5-4". Think I'll go with close to 4"

These users thanked the author Mike OMelia for the post: Kbore (Fri Jul 05, 2024 1:27 pm)

Top

Page 1 of 1

[ 6 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 57 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:

Official Luthiers Forum!

Forum rules

Gibson J45 Body Thickness

Who is online