Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 22, 2024 11:39 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject:
PostPosted: Tue Jan 04, 2005 2:22 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
I bent the Black Acacia I got from Don this weekend. It bent like butter, but it sure did stain green. I am woundering if maybe I over wetted it or over cooked it. I scrapped and sanded for ever and I still see a bit of a green hue in some places.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 04, 2005 2:39 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Hmm, strange? Did you wrap the wood in foil? Is it possible the steel slats stained it? Do you use steel slats for that matter? I took a wet wash cloth and wiped both sides of each side just enough to darken the wood with water, then wrapped them in foil, placed them between stainless steel slats and bent them. I'm not sure what temp, but I wait to hear the water sizzling, then I bend, usually takes 2 or 3 minutes total.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 04, 2005 2:42 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

I have had that happen to koa. What happens when you wipe it with mineral spirits? Can you still see the green? Mine went brown while the mineral spirits were wet and under finish it looks fine.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 04, 2005 2:45 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Dec 27, 2004 11:25 pm
Posts: 7202
Location: United States
Michael,
I've never had it turn green on me....?! What were you bending the wood with? Were you using distilled water, or tap water?

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 04, 2005 2:52 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
[QUOTE=LanceK] Hmm, strange? Did you wrap the wood in foil? Is it possible the steel slats stained it? Do you use steel slats for that matter? I took a wet wash cloth and wiped both sides of each side just enough to darken the wood with water, then wrapped them in foil, placed them between stainless steel slats and bent them. I'm not sure what temp, but I wait to hear the water sizzling, then I bend, usually takes 2 or 3 minutes total.[/QUOTE] I used distilled water, I think I wetted it to much. I wetted like I was bending Koa. I wrapped in foil. It took about 10 min to bend but I am still using the bulbs so the wood does not heat as fast and evenly as it would with a blanket. (next on my wish list).. The staining was worst at the waist.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 42 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com