***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 10:50 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
SnowManSnow
 Post subject: Em6000 leveling
PostPosted: Sun Jun 02, 2019 6:46 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
I can’t find where I wrote the schedule down and the can doesn’t offer the information, but how long should I wait before doing a mid-finish level sand? I have 10 coats on at the moment and would like to level before applying more


Sent from my iPhone using Tapatalk
Top
 Profile  
 
Barry Daniels
 Post subject: Re: Em6000 leveling
PostPosted: Sun Jun 02, 2019 7:57 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
No need to wait more than 24 hours.


These users thanked the author Barry Daniels for the post: SnowManSnow (Sun Jun 02, 2019 8:01 pm)
Top
 Profile  
 
J De Rocher
 Post subject: Re: Em6000 leveling
PostPosted: Sun Jun 02, 2019 8:06 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2523
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
Overnight is fine.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter
Top
 Profile  
 
SnowManSnow
 Post subject: Re: Em6000 leveling
PostPosted: Sun Jun 02, 2019 8:33 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
J De Rocher wrote:
Overnight is fine.

Is there a point that is too long? I suppose fully cured is too long...


Sent from my iPhone using Tapatalk
Top
 Profile  
 
J De Rocher
 Post subject: Re: Em6000 leveling
PostPosted: Sun Jun 02, 2019 8:40 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2523
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
This is from the Target Coatings website:

"EM6000, as well as all other EMTECH™ topcoats, has a unique burn-in property that allows the next/following coat to melt into into itself and chemically bond into and onto the last coat that was applied. The EM6000 Production Lacquer offers 100% burn-in qualities that remain functional regardless of how long ago the last coat was applied. "

I've applied EM6000 on top of EM6000 about a year after the initial application with no problems.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


These users thanked the author J De Rocher for the post: SnowManSnow (Sun Jun 02, 2019 8:46 pm)
Top
 Profile  
 
SnowManSnow
 Post subject: Re: Em6000 leveling
PostPosted: Sun Jun 02, 2019 8:46 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
J De Rocher wrote:
This is from the Target Coatings website:

"EM6000, as well as all other EMTECH[TRADE MARK SIGN] topcoats, has a unique burn-in property that allows the next/following coat to melt into into itself and chemically bond into and onto the last coat that was applied. The EM6000 Production Lacquer offers 100% burn-in qualities that remain functional regardless of how long ago the last coat was applied. "

I've applied EM6000 on top of EM6000 about a year after the initial application with no problems.

That’s actually pretty cool


Sent from my iPhone using Tapatalk
Top
 Profile  
 
SnowManSnow
 Post subject: Re: Em6000 leveling
PostPosted: Mon Jun 03, 2019 10:39 am 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
So after level sanding should I go about thinning it ? Would that help it lay down smoother?
My setup is a simple HF gun and compressor like Lichty uses in his awesome video .... it normally goes on dempled or at least not smooth and I have to sand that back, which is easily done I guess


Sent from my iPhone using Tapatalk
Top
 Profile  
 
Barry Daniels
 Post subject: Re: Em6000 leveling
PostPosted: Mon Jun 03, 2019 5:42 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
I would recommend practicing with your spray gun until you can get a smooth coat. A dimpled surface (called orange peel) is often caused by excessive air.
Top
 Profile  
 
klooker
 Post subject: Re: Em6000 leveling
PostPosted: Tue Jun 04, 2019 7:40 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
Partial hijack here but how long do you then wait for final buffing?

I'm considering going to EM6000 after I finish my can of Mohawk.

Thanks

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.
Top
 Profile  
 
J De Rocher
 Post subject: Re: Em6000 leveling
PostPosted: Tue Jun 04, 2019 10:47 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2523
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
The shortest I've waited is 18 days. Jay Lichty buffs after 14 days. Target says it can be buffed after 120 hours, but Jay said in his video on using EM6000 that it was not cured enough in that time for his liking. There's no harm in waiting longer than 2 weeks if it works for your schedule.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter
Top
 Profile  
 
jfmckenna
 Post subject: Re: Em6000 leveling
PostPosted: Tue Jun 04, 2019 3:46 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
SnowManSnow wrote:
J De Rocher wrote:
This is from the Target Coatings website:

"EM6000, as well as all other EMTECH[TRADE MARK SIGN] topcoats, has a unique burn-in property that allows the next/following coat to melt into into itself and chemically bond into and onto the last coat that was applied. The EM6000 Production Lacquer offers 100% burn-in qualities that remain functional regardless of how long ago the last coat was applied. "

I've applied EM6000 on top of EM6000 about a year after the initial application with no problems.

That’s actually pretty cool


Sent from my iPhone using Tapatalk


Agreed! I didn't know that about EM. I gave up water base finishes a long time ago with the understanding that if someone solves the problems with water base finishes I might jsut try them again some day... Hmmmm.
Top
 Profile  
 
SnowManSnow
 Post subject: Re: Em6000 leveling
PostPosted: Tue Jun 04, 2019 9:34 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
jfmckenna wrote:
SnowManSnow wrote:
J De Rocher wrote:
This is from the Target Coatings website:

"EM6000, as well as all other EMTECH[TRADE MARK SIGN] topcoats, has a unique burn-in property that allows the next/following coat to melt into into itself and chemically bond into and onto the last coat that was applied. The EM6000 Production Lacquer offers 100% burn-in qualities that remain functional regardless of how long ago the last coat was applied. "

I've applied EM6000 on top of EM6000 about a year after the initial application with no problems.

That’s actually pretty cool


Sent from my iPhone using Tapatalk


Agreed! I didn't know that about EM. I gave up water base finishes a long time ago with the understanding that if someone solves the problems with water base finishes I might jsut try them again some day... Hmmmm.

I’m no expert in comparison to others here... but I’ve finished 3 with it now, and imo it’s pretty great.


Sent from my iPhone using Tapatalk
Top
 Profile  
 
jfmckenna
 Post subject: Re: Em6000 leveling
PostPosted: Wed Jun 05, 2019 8:11 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
SnowManSnow wrote:
I’m no expert in comparison to others here... but I’ve finished 3 with it now, and imo it’s pretty great.


Sent from my iPhone using Tapatalk


Brushing or spraying?
Top
 Profile  
 
sdsollod
 Post subject: Re: Em6000 leveling
PostPosted: Wed Jun 05, 2019 9:31 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
I have been using EM6000 and have been very happy with it. I typically spray 4 or 5 sessions in a day about an hour apart and level sand the next day with 400 grit. I repeat as necessary. When I'm satisfied with the number of coats, I wait about 3 weeks, wet sand and buff out. I find it to be a very forgiving finish and the results very good.


You do not have the required permissions to view the files attached to this post.

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 79 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com