Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

Taylor Neck Video

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

crowduck

Post subject:

Posted: Sun Feb 12, 2006 1:51 pm

Cocobolo

Joined: Fri Jan 14, 2005 12:05 pm
Posts: 409
Location: United States

I found this on the Taylor website, and thought it might be of interest here. Shows the Taylor neck joint system which is very similar to the double mortise/tenon joint that's been discussed here, and on John Mayes video.

This link is for a high speed connection.

https://www.taylorguitars.com/guitars/features/ntneck/Video. aspx?file=NT_Neck_High.wmx

CrowDuck

_________________
Chris Nielsen
Soquel, CA.

Top

Andy Zimmerman

Post subject:

Posted: Sun Feb 12, 2006 2:32 pm

Brazilian Rosewood

Joined: Fri Jun 10, 2005 9:51 am
Posts: 2148
Location: San Diego, CA
First name: Andy
Last Name: Zimmerman
City: San Diego
State: CA
Zip/Postal Code: 92103
Country: United States
Focus: Build

This link doesn't get you there...
Tell us the path via the Taylor site
Thanks
Andy

_________________
Andy Z.
http://www.lazydogguitars.com

Top

Don A

Post subject:

Posted: Sun Feb 12, 2006 2:56 pm

Koa

Joined: Wed Dec 29, 2004 3:48 pm
Posts: 1478
First name: Don
Last Name: Atwood
City: Arlington
State: Virginia
Country: USA
Focus: Build
Status: Amateur

Andy, try it here and select the video in the bottom right. Taylor actually sent out DVD's explaining their neck joint, and I believe the headstock scarf joint, when it was first introduced.

_________________
Don Atwood
Arlington, VA

Top

vachterm

Post subject:

Posted: Sun Feb 12, 2006 8:12 pm

Cocobolo

Joined: Thu Jun 02, 2005 6:34 pm
Posts: 214
Location: Israel

youd might also wanna try http://www.taylorguitars.com/see-hear/

its a section of the site with a whole lotta videos in it.
some wood talk, all the factory fridays stuff, interviews and all...

Udi

Top

Cocephus

Post subject:

Posted: Mon Feb 13, 2006 1:27 am

Contributing Member

Joined: Sun Jul 24, 2005 1:53 pm
Posts: 1075
Location: United States
First name: Coe
Last Name: Franklin
City: Decatur
State: IN
Country: USA

I did a repair on a Chris Adjustomatic last fall that had a neck adjustment scheme similar to Taylor`s. It relied on string tension and a setscrew in combination with a fulcrum. Very different! I have a couple of not so good pics of that if anyone`s interested.

_________________
Give me 50 cents worth of regular.
Check my oil too, if you don`t mind,,,

Top

Michael Dale Payne

Post subject:

Posted: Mon Feb 13, 2006 6:10 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

Did eveyone notice? that the extension is never floating, it is always solid to the block. In a post a couple weeks ago we discussed this issue, and saw examples with floating extensions. Notice on a Taylor, if you change the set-back angle shim on the heal you also have to change the extenion shim as well to keep the extenion in full abd solid contact with the neck block.MichaelP38761.5909143519

Top

peterm

Post subject:

Posted: Mon Feb 13, 2006 10:47 am

Brazilian Rosewood

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional

looks like a good idea.....sure a lot easier to build in a factory with all those fancy machines!

I think similar can be achieve without the shims but using the double mortise and tenon joint with an extension of the neck running under the FB extenstion!

Just my thoughts!

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com

Top

Page 1 of 1

[ 7 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: