Official Luthiers Forum!

I have a few things that are gathering dust that I thought I may as well list.

First up is a jig to cut f-holes. This is CNC machined and it is intended to be used on a pin router to cut f-holes in archtop plates. I used it to cut f-holes in hollow tele's. I remade a master jig and I have barely used this. ($40)




Next is a 25' Radius dish. This is made of MDF. It came from a well known supplier... I just can't remember who. It needs to be glued and screwed down to a flat substrait. It is unused. ($40)




Stew Mac Circle Cutter (new style) - I have never used this. I use my Cochran base for just about everything. ($35)




Brace Profile Jig - This is a jig made by Tracy Leveque's company. It is very nicely made and works well. I just am set in my ways and don't really use it. ($30)




Blues Creek Binding Jig - This is the Ribbecke style binding jig made by John Hall. This DOES NOT come with the cradle that holds the guitar, but does come with the trimmer. ($125)




000/OM Mold - John Hall 000/OM mold (I have 2). ($65)




Benedetto 17" Mold - Blues Creek Mold. ($65)




Selmer Mold - Blues Creek Mold ($65)




J200 Mold - Blues Creek Mold (this has a few coats of Behlen's Rock Hard varnish on it). ($65)




Neck Blanks.

I have 3 Olsen Style Neck Blanks. You can see the dimensions posted below. They are all very nice with Hondo Mahogany, Maple, and Rosewood. Each is big enough to get 2 necks from.

2 of them have small blemishes in them that will fall out side the neck pattern. One is a bug hole, the other is a boo-boo I put in it with a router.

These are $75 each.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Brock
I'll take the Benedetto Mold
Thanks
Dave

Brock I'll buy the radius dish. For shipping, I'm in zipcode 27606. Please PM with payment info, thanks.

[QUOTE=bertoncini] Brock
I'll take the Benedetto Mold
Thanks
Dave[/QUOTE]

It is yours... I will send you a PM with my pay pal address and shipping.

Thanks!!

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

[QUOTE=highdrawlicks] Brock I'll take the Stew Mac new circle cutter. Sending you a PM[/QUOTE]

You got it. Thanks!!

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

[QUOTE=lex_luthier] Brock I'll buy the radius dish. For shipping, I'm in zipcode 27606. Please PM with payment info, thanks. [/QUOTE]

Ok, it is yours. I will PM you the details.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

I am also interested in buying or trading a few items. Here is a list of stuff I am looking for.

LMI top grade Madagasar Rosewood fingerboards.
High Grade AAA/Master Lutz spruce
A couple striped sets of Sitka (symmetrical striping)
AAA / Master Grade EIR sets
Euro tops (not carpathian... I have lots of that)
Waverly tuners with black MOP buttons

I have lots of stuff that I could trade... if you have any of this stuff, let me know and maybe we can work something out.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Brock,
I'll take the f-hole template for $40.
my zip is 34231

_________________
Dave Bland

remember...

"If it doesn't play in tune...it's just pretty wood"

The OOO / OM mold is spoken for.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

[QUOTE=Dave-SKG] Brock,
I'll take the f-hole template for $40.
my zip is 34231[/QUOTE]

You got it bro...

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Something else I thought of that I am interested in buying, orphaned brw sides. No sapwood if I can help it and toward the reds and blacks if I could pick the colors.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Is there still an 000/OM mold left?

Andrew

Would you take 75 for the binding jig?
                      James

_________________
James W Bolan
Nashville Tennessee

I will offer $100 for the binding jig...

Mike

Well thanks Slackeymike.I`ll offer $101.Ain`t this fun.
                               James

_________________
James W Bolan
Nashville Tennessee

[QUOTE=James W B] Well thanks Slackeymike.I`ll offer $101.Ain`t this fun.
                                   James [/QUOTE]

Sure, that works. Sold.

:-)

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

I have a brand new set of dovetail neck routing templates from Stewmac. These sell for about ~75 on their site. I will sell them for $35. These come with hardware and instructions for building a jig.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Seeing that they have not gone for $75, I will sell these neck blocks for $50 each. This is a great deal, you will easily be able to get two necks from each block, and you couldn't even buy the raw stock for this price.

I am selling them simply because I am not using this aesthetic any more.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Brock,

I'll take one of the neck blocks. Do you still have the one without the blemishes? Please send me a PM with your Paypal info.

Ray

Brock,
I'll take one, or maybe a trade?
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

I meant for the $50 neck block in case there was any confusion.
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

Brock, forgot - I'll take the neck routing templates too.

Ray

Brock, I've been waiting to give folks a chance but I can't pass up a bargain. I'll take the 3rd neck block.

_________________
Don Atwood
Arlington, VA

Brock,
   If still available I will take a neck block...let me know.

Brad

_________________
Brad
Avon, OH