Official Luthiers Forum! • View topic - Brock Poling

Board index » Forum Archive

All times are UTC - 5 hours

Brock Poling :: Stuff for sale & WTB List

Page 1 of 2

[ 28 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

Brock Poling

Post subject:

Posted: Mon May 14, 2007 1:27 pm

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

I have a few things that are gathering dust that I thought I may as well list.

First up is a jig to cut f-holes. This is CNC machined and it is intended to be used on a pin router to cut f-holes in archtop plates. I used it to cut f-holes in hollow tele's. I remade a master jig and I have barely used this. ($40)

Next is a 25' Radius dish. This is made of MDF. It came from a well known supplier... I just can't remember who. It needs to be glued and screwed down to a flat substrait. It is unused. ($40)

Stew Mac Circle Cutter (new style) - I have never used this. I use my Cochran base for just about everything. ($35)

Brace Profile Jig - This is a jig made by Tracy Leveque's company. It is very nicely made and works well. I just am set in my ways and don't really use it. ($30)

Blues Creek Binding Jig - This is the Ribbecke style binding jig made by John Hall. This DOES NOT come with the cradle that holds the guitar, but does come with the trimmer. ($125)

000/OM Mold - John Hall 000/OM mold (I have 2). ($65)

Benedetto 17" Mold - Blues Creek Mold. ($65)

Selmer Mold - Blues Creek Mold ($65)

J200 Mold - Blues Creek Mold (this has a few coats of Behlen's Rock Hard varnish on it). ($65)

Neck Blanks.

I have 3 Olsen Style Neck Blanks. You can see the dimensions posted below. They are all very nice with Hondo Mahogany, Maple, and Rosewood. Each is big enough to get 2 necks from.

2 of them have small blemishes in them that will fall out side the neck pattern. One is a bug hole, the other is a boo-boo I put in it with a router.

These are $75 each.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

bertoncini

Post subject:

Posted: Mon May 14, 2007 1:40 pm

Cocobolo

Joined: Wed Aug 17, 2005 3:56 pm
Posts: 172
Location: United States
First name: Dave
Last Name: Bertoncini
City: Sun City West
State: AZ
Zip/Postal Code: 85375
Country: USA
Focus: Build
Status: Semi-pro

Brock
I'll take the Benedetto Mold
Thanks
Dave

Top

James Ringelspaugh

Post subject:

Posted: Mon May 14, 2007 1:58 pm

Contributing Member

Joined: Mon Jan 08, 2007 3:47 pm
Posts: 1213
Location: Raleigh, NC
First name: Ringo

Brock I'll buy the radius dish. For shipping, I'm in zipcode 27606. Please PM with payment info, thanks.

Top

Brock Poling

Post subject:

Posted: Mon May 14, 2007 4:16 pm

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

[QUOTE=bertoncini] Brock
I'll take the Benedetto Mold
Thanks
Dave[/QUOTE]

It is yours... I will send you a PM with my pay pal address and shipping.

Thanks!!

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Brock Poling

Post subject:

Posted: Mon May 14, 2007 4:17 pm

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

[QUOTE=highdrawlicks] Brock I'll take the Stew Mac new circle cutter. Sending you a PM[/QUOTE]

You got it. Thanks!!

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Brock Poling

Post subject:

Posted: Mon May 14, 2007 4:18 pm

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

[QUOTE=lex_luthier] Brock I'll buy the radius dish. For shipping, I'm in zipcode 27606. Please PM with payment info, thanks. [/QUOTE]

Ok, it is yours. I will PM you the details.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Brock Poling

Post subject:

Posted: Mon May 14, 2007 4:30 pm

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

I am also interested in buying or trading a few items. Here is a list of stuff I am looking for.

LMI top grade Madagasar Rosewood fingerboards.
High Grade AAA/Master Lutz spruce
A couple striped sets of Sitka (symmetrical striping)
AAA / Master Grade EIR sets
Euro tops (not carpathian... I have lots of that)
Waverly tuners with black MOP buttons

I have lots of stuff that I could trade... if you have any of this stuff, let me know and maybe we can work something out.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Dave-SKG

Post subject:

Posted: Tue May 15, 2007 4:33 am

Koa

Joined: Wed Dec 29, 2004 5:34 am
Posts: 1906
Location: United States

Brock,
I'll take the f-hole template for $40.
my zip is 34231

_________________
Dave Bland

remember...

"If it doesn't play in tune...it's just pretty wood"

Top

Brock Poling

Post subject:

Posted: Tue May 15, 2007 6:03 am

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

The OOO / OM mold is spoken for.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Brock Poling

Post subject:

Posted: Tue May 15, 2007 6:12 am

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

[QUOTE=Dave-SKG] Brock,
I'll take the f-hole template for $40.
my zip is 34231[/QUOTE]

You got it bro...

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Brock Poling

Post subject:

Posted: Tue May 15, 2007 9:07 am

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

Something else I thought of that I am interested in buying, orphaned brw sides. No sapwood if I can help it and toward the reds and blacks if I could pick the colors.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

harmonist34

Post subject:

Posted: Wed May 16, 2007 10:03 am

Contributing Member

Joined: Fri Jul 22, 2005 4:28 am
Posts: 220
Location: United States

Is there still an 000/OM mold left?

Andrew

Top

James W B

Post subject:

Posted: Sat May 19, 2007 1:41 am

Koa

Joined: Sat Jul 01, 2006 5:55 am
Posts: 1392
Location: United States
First name: James
Last Name: Bolan
City: Nashville
State: Tennessee
Country: USA

Would you take 75 for the binding jig?
James

_________________
James W Bolan
Nashville Tennessee

Top

slackkeymike

Post subject:

Posted: Sat May 19, 2007 7:22 am

Cocobolo

Joined: Sat Dec 30, 2006 2:01 am
Posts: 105

I will offer $100 for the binding jig...

Mike

Top

James W B

Post subject:

Posted: Sat May 19, 2007 11:50 am

Koa

Joined: Sat Jul 01, 2006 5:55 am
Posts: 1392
Location: United States
First name: James
Last Name: Bolan
City: Nashville
State: Tennessee
Country: USA

Well thanks Slackeymike.I`ll offer $101.Ain`t this fun.
James

_________________
James W Bolan
Nashville Tennessee

Top

Brock Poling

Post subject:

Posted: Sat May 19, 2007 12:42 pm

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

[QUOTE=James W B] Well thanks Slackeymike.I`ll offer $101.Ain`t this fun.
James

[/QUOTE]

Sure, that works. Sold.

:-)

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Brock Poling

Post subject:

Posted: Sun May 20, 2007 12:01 pm

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

I have a brand new set of dovetail neck routing templates from Stewmac. These sell for about ~75 on their site. I will sell them for $35. These come with hardware and instructions for building a jig.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Brock Poling

Post subject:

Posted: Sun May 20, 2007 12:05 pm

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

Seeing that they have not gone for $75, I will sell these neck blocks for $50 each. This is a great deal, you will easily be able to get two necks from each block, and you couldn't even buy the raw stock for this price.

I am selling them simply because I am not using this aesthetic any more.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Ray L

Post subject:

Posted: Sun May 20, 2007 12:17 pm

Mahogany

Joined: Thu Jan 13, 2005 6:06 am
Posts: 67
Location: United States
First name: Raymond
Last Name: Lee
City: Elmhurst
State: Illinois
Zip/Postal Code: 60126
Country: USA
Focus: Build
Status: Amateur

Brock,

I'll take one of the neck blocks. Do you still have the one without the blemishes? Please send me a PM with your Paypal info.

Ray

Top

LuthierSupplier

Post subject:

Posted: Sun May 20, 2007 12:23 pm

Koa

Joined: Sat Jun 24, 2006 12:41 pm
Posts: 975
Location: United States
First name: Tracy
Last Name: Leveque
City: Denver
State: CO
Country: USA
Focus: Build
Status: Amateur

Brock,
I'll take one, or maybe a trade?
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

Top

LuthierSupplier

Post subject:

Posted: Sun May 20, 2007 12:23 pm

Koa

I meant for the $50 neck block in case there was any confusion.
Tracy

_________________
Tracy
http://www.luthiersuppliers.com

Top

Ray L

Post subject:

Posted: Sun May 20, 2007 12:31 pm

Mahogany

Brock, forgot - I'll take the neck routing templates too.

Ray

Top

Don A

Post subject:

Posted: Sun May 20, 2007 12:42 pm

Koa

Joined: Wed Dec 29, 2004 3:48 pm
Posts: 1478
First name: Don
Last Name: Atwood
City: Arlington
State: Virginia
Country: USA
Focus: Build
Status: Amateur

Brock, I've been waiting to give folks a chance but I can't pass up a bargain. I'll take the 3rd neck block.

_________________
Don Atwood
Arlington, VA

Top

Brad Way

Post subject:

Posted: Sun May 20, 2007 1:15 pm

Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States

Brock,
If still available I will take a neck block...let me know.

Brad

_________________
Brad
Avon, OH

Top

Page 1 of 2

[ 28 posts ]

Go to page 1, 2 Next

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: Bing [Bot] and 48 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: