Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

End Graft

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

JeremiahB.

Post subject:

Posted: Thu May 19, 2005 2:00 am

Mahogany

Joined: Mon Jan 10, 2005 12:11 pm
Posts: 87

I'm getting ready to inlay the end graft on my first guitar and I was wondering what type of glue or cement most of you use for this. It's an ivoroid end piece and has two strips of plastic purfling that go down the sides. Which works better - CA or Duco (or Weld on)?

Top

LanceK

Post subject:

Posted: Thu May 19, 2005 2:04 am

Site Admin

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8553
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro

Ive only used DUCO for plastic/ivoride bindings. I've heard you can wipe the gluing edges with acetone to sofen them up and then glue with tightbond or LMI white.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com

Top

John Mayes

Post subject:

Posted: Thu May 19, 2005 2:19 am

Brazilian Rosewood

Joined: Sat Jan 08, 2005 3:37 am
Posts: 2670
Location: United States
First name: John
Last Name: Mayes
City: Norman
State: OK
Focus: Build
Status: Professional

for endgrafts we always used CA when at pantheon. They may do it
different now, so I can't say, but I did hundreds with CA and it worked like
a charm.

_________________
John Mayes
http://www.mayesluthier.com

Top

Michael Dale Payne

Post subject:

Posted: Thu May 19, 2005 2:31 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

I have done the acetone and titebond but use CA now when doing plastic.

Top

JeremiahB.

Post subject:

Posted: Thu May 19, 2005 2:47 am

Mahogany

Joined: Mon Jan 10, 2005 12:11 pm
Posts: 87

When using CA, do you apply directly to the end graft and then flood along the purfling lines?

Top

Dave Rector

Post subject:

Posted: Thu May 19, 2005 3:03 am

Brazilian Rosewood

Joined: Sat Feb 12, 2005 1:07 am
Posts: 2281
Location: Jones, OK

I use a combination made up od wood with plastic purfling strips that I get from Martin.

I get everything fit up real well then flood it with CA. Haven't seen a problem with it yet.

_________________
Dave Rector
Rector Guitars

Top

Michael Dale Payne

Post subject:

Posted: Thu May 19, 2005 3:55 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

I apply medium viscosity CA to the bottom of the channel. fit the graft and wick edges with thin viscosity CA

Top

John Mayes

Post subject:

Posted: Thu May 19, 2005 6:59 am

Brazilian Rosewood

Joined: Sat Jan 08, 2005 3:37 am
Posts: 2670
Location: United States
First name: John
Last Name: Mayes
City: Norman
State: OK
Focus: Build
Status: Professional

[QUOTE=JeremiahB.] When using CA, do you apply directly to the end
graft and then flood along the purfling lines?[/QUOTE]

I just used thick CA for the whole kit and caboodle.

_________________
John Mayes
http://www.mayesluthier.com

Top

Page 1 of 1

[ 8 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: