Large main brace, straight or radiused?

Board index » Forum Archive

All times are UTC - 5 hours

Large main brace, straight or radiused?

Page 1 of 1

[ 15 posts ]

Print view

Previous topic | Next topic

Author

Message

LarryH

Post subject:

Posted: Sat Jan 20, 2007 4:55 am

Contributing Member

Joined: Tue Jan 03, 2006 1:47 pm
Posts: 1624
Location: United States
First name: Larry
Last Name: Hawes
Focus: Build
Status: Amateur

What do you recommend?

Thank you

Changed title thanks Steve.LarryH39102.5618634259

_________________
Thank You and Best To All

Top

Steve Saville

Post subject:

Posted: Sat Jan 20, 2007 5:22 am

Contributing Member

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States

I make my transverse brace flat.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.

Top

LarryH

Post subject:

Posted: Sat Jan 20, 2007 5:29 am

Contributing Member

Joined: Tue Jan 03, 2006 1:47 pm
Posts: 1624
Location: United States
First name: Larry
Last Name: Hawes
Focus: Build
Status: Amateur

[QUOTE=SteveS] I make my transverse brace flat.[/QUOTE]

Thanks Steve, anyone else?

_________________
Thank You and Best To All

Top

Jim Watts

Post subject:

Posted: Sat Jan 20, 2007 5:30 am

Contributing Member

Joined: Thu May 12, 2005 5:46 am
Posts: 2990
Location: United States

And I make mine with a radius and put a little flat into the sound board for the finger board.

There'll probably a 3rd way in just a few minutes as well.

I've done it both ways, but prefer this way.

_________________
Jim Watts
http://jameswattsguitars.com

Top

crazymanmichael

Post subject:

Posted: Sat Jan 20, 2007 5:34 am

Brazilian Rosewood

Joined: Mon Feb 21, 2005 6:16 am
Posts: 2244
Location: United States
First name: michael
Last Name: mcclain
City: pendleton
State: sc
Zip/Postal Code: 29670
Status: Professional

you will find that there are basically three groups; those who radius, and those who leave it flat, as well as those who partially radius it leaving the portion under the fb extension flat. all different ways that poor mistreated cat keeps losing his skin.

most of those who radius it then sand a flat on the top under the fb extension. a jig for this process is shown in the jigs link at top. i fall into this group.

crazymanmichael39102.5670949074

Top

Dave White

Post subject:

Posted: Sat Jan 20, 2007 5:58 am

Brazilian Rosewood

Joined: Tue Jul 05, 2005 10:53 pm
Posts: 2198
Location: Hughenden Valley, England

I radius and let the fingerboard extension float free over the body.Dave White39102.5827893519

_________________
Dave White
De Faoite Stringed Instruments
". . . the one thing a machine just can't do is give you character and personalities and sometimes that comes with flaws, but it always comes with humanity" Monty Don talking about hand weaving, "Mastercrafts", Weaving, BBC March 2010

Top

LarryH

Post subject:

Posted: Sat Jan 20, 2007 6:07 am

Contributing Member

Joined: Tue Jan 03, 2006 1:47 pm
Posts: 1624
Location: United States
First name: Larry
Last Name: Hawes
Focus: Build
Status: Amateur

I realize what an old topic this must be but I REALLY appreciate the beginner's help. I'll radius and then flatten.

Thanks

Larry

_________________
Thank You and Best To All

Top

peterm

Post subject:

Posted: Sat Jan 20, 2007 7:38 am

Brazilian Rosewood

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional

Flat in the center and then taper the sides to a radius.

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com

Top

Colin S

Post subject:

Posted: Sat Jan 20, 2007 9:30 am

Brazilian Rosewood

Joined: Thu Jan 06, 2005 7:29 am
Posts: 3840
Location: England

[QUOTE=Dave White] I radius and let the fingerboard extension float free over the body.[/QUOTE]

I second that.

Colin

_________________
I don't believe in anything, I simply make use of a set of reasonable working hypotheses.

Top

Andy Zimmerman

Post subject:

Posted: Sat Jan 20, 2007 4:15 pm

Brazilian Rosewood

Joined: Fri Jun 10, 2005 9:51 am
Posts: 2148
Location: San Diego, CA
First name: Andy
Last Name: Zimmerman
City: San Diego
State: CA
Zip/Postal Code: 92103
Country: United States
Focus: Build

I make mine flat

_________________
Andy Z.
http://www.lazydogguitars.com

Top

Serge Poirier

Post subject:

Posted: Sat Jan 20, 2007 4:57 pm

Brazilian Rosewood

Joined: Sun Dec 25, 2005 6:32 am
Posts: 7774
Location: Canada

Like my bud Andy, i make mine flat.

Top

TonyKarol

Post subject:

Posted: Sun Jan 21, 2007 1:29 am

Contributing Member

Joined: Fri Sep 09, 2005 7:51 am
Posts: 3786
Location: Canada

Radiused.

_________________
Tony Karol
www.karol-guitars.com
"let my passion .. fulfill yours"

Top

Dave Anderson

Post subject:

Posted: Sun Jan 21, 2007 1:44 am

Brazilian Rosewood

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States

I pretty much do as Hesh said : Flat,no radius above the sound hole.

_________________
Anderson Guitars
Clearwater,Fl. 33755

Top

Dave Rector

Post subject:

Posted: Sun Jan 21, 2007 2:26 am

Brazilian Rosewood

Joined: Sat Feb 12, 2005 1:07 am
Posts: 2281
Location: Jones, OK

Mine are flat.

_________________
Dave Rector
Rector Guitars

Top

Page 1 of 1

[ 15 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 24 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:

Official Luthiers Forum!

Large main brace, straight or radiused?

Who is online