***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Apr 22, 2025 2:13 am


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 17 posts ] 
  Print view Previous topic | Next topic 
Author Message
LanceK
 Post subject:
PostPosted: Sat Apr 30, 2005 1:18 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8553
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Does any one know the degree of taper the martin bridge pin reamer they offer in there tools section is?

Heather from Gurian says there pins have a 5 degree taper - Stewmac says "The 3-degree reamer tapers from approximately .312" to .150", with 3" cutting length, and is suitable for many bridge pins from Gibson and Gurian."

I dont know what to buy for my stock of ebony pins from Gurian - Paul Woolson, what you using?

ThanksLanceK38472.4313773148

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
Pwoolson
 Post subject:
PostPosted: Sat Apr 30, 2005 1:32 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jan 08, 2005 1:26 am
Posts: 2556
Location: United States
Lance, I've always been under the impression that Gurian uses 3? and martin uses 5?. Now I guess Heather is telling everyone that they use 5?. Not sure what to think anymore. I've got a 3? reamer that I use for my Gurian pins and a 5? that I use for martin stuff. They both seam to work well and the pins fit tight. Then again, if you were using the wrong reamer, I think the pins would seam to fit tight. In fact, if you drilled a straight hole, the pins would probably seam to fit tight. So not sure what to tell you except that I use 3? for Guiran and 5? for martin (everyone else). Hope that helps/confuses you completely. Paul
Top
 Profile  
 
crazymanmichael
 Post subject:
PostPosted: Sat Apr 30, 2005 1:43 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Feb 21, 2005 6:16 am
Posts: 2244
Location: United States
First name: michael
Last Name: mcclain
City: pendleton
State: sc
Zip/Postal Code: 29670
Status: Professional
the best summary of bridge pin info i've found is here:

        http://www.customi nlay.com/Store/Ivory/sizechart/bridgepinsizes.html

he gives specs for the various bridgepin sizes and what instuments they fit.

he states thatthe martins pre '94, with the exception of the hd-28 are 3 degree and martins since 94, and the pre '94 hd-28 are 5 degree.

crazymanmichael38472.4957060185
Top
 Profile  
 
LanceK
 Post subject:
PostPosted: Sat Apr 30, 2005 2:02 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8553
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Thanks Paul. Michael -
Looks like contrary to Heathers comments - I need a 3 degree reamer - I have a 5 degree - and its making a much to wide hole at the top before the bottom seats -

thanks again -

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
tippie53
 Post subject:
PostPosted: Sat Apr 30, 2005 3:46 am 
Offline
Koa
Koa

Joined: Thu Feb 17, 2005 3:38 pm
Posts: 1542
Location: United States
Grizzly has the set of both tapers and the end pine reamer. I bought it and found it a great tool.


Top
 Profile  
 
crazymanmichael
 Post subject:
PostPosted: Sat Apr 30, 2005 4:13 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Feb 21, 2005 6:16 am
Posts: 2244
Location: United States
First name: michael
Last Name: mcclain
City: pendleton
State: sc
Zip/Postal Code: 29670
Status: Professional
grizzley's price is approx 1/2 the others as well.
Top
 Profile  
 
Sylvan
 Post subject:
PostPosted: Sat Apr 30, 2005 4:32 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jan 09, 2005 8:49 am
Posts: 389
I bought the Grizzly set (both tapers and a reamer) and do not like them
at all. Anyone want them? Make me an offer!

_________________
Sylvan
http://www.wellsguitars.com
Top
 Profile  
 
crazymanmichael
 Post subject:
PostPosted: Sat Apr 30, 2005 4:40 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Feb 21, 2005 6:16 am
Posts: 2244
Location: United States
First name: michael
Last Name: mcclain
City: pendleton
State: sc
Zip/Postal Code: 29670
Status: Professional
sylvan

i've wondered how they could offer them for such a low price compared to the stew mac version i bought anumber of years before grizz came out with them. what don't you like about them?


Top
 Profile  
 
buddy lee
 Post subject:
PostPosted: Sat Apr 30, 2005 4:43 am 
Offline
Mahogany
Mahogany

Joined: Wed Mar 23, 2005 4:05 pm
Posts: 56
Location: United States
I also found the Grizzly reamers to be of poor quality. The cutting edges just would not cut and I had to return them for a refund. It must be the luck of the draw on those... sounds like John and others have received some good ones that work fine from Grizzly.
Top
 Profile  
 
arvey
 Post subject:
PostPosted: Sat Apr 30, 2005 6:24 am 
Offline
Koa
Koa

Joined: Sun Apr 24, 2005 4:05 am
Posts: 749
Location: Canada
I have the Martin reamer and use it for pins and end pins. Works well.
Top
 Profile  
 
Tim McKnight
 Post subject:
PostPosted: Sat Apr 30, 2005 6:56 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1532
Location: Morral, OH
I have the Grizzly reamers and also the Martin Reamer. I use the Grizzly reamers and they work excellent. I like them becaues they cut very slowly and are not aggressive, unlike the Martin reamer. It's a lot easier to remove a bit of wood than to try to put it back   

_________________
tim...
http://www.mcknightguitars.com
Top
 Profile  
 
Terry Stowell
 Post subject:
PostPosted: Sat Apr 30, 2005 7:18 am 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 24, 2005 4:53 am
Posts: 1584
Location: PA, United States
Sylvan,

I need a set to compliment my lovely hardware store reamer (not sure even what size it is) I'd be interested...

What don't you like about them?
Top
 Profile  
 
LanceK
 Post subject:
PostPosted: Sat Apr 30, 2005 7:22 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8553
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
what taper is the Martin reamer? I have it to and it dont match my Gurian pins

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
arvey
 Post subject:
PostPosted: Sat Apr 30, 2005 8:31 am 
Offline
Koa
Koa

Joined: Sun Apr 24, 2005 4:05 am
Posts: 749
Location: Canada
I get my pins from guitarwood.ca and the martin reamer matches them really nicely.
Top
 Profile  
 
Sylvan
 Post subject:
PostPosted: Mon May 02, 2005 2:04 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jan 09, 2005 8:49 am
Posts: 389
Terry -
They are very cheaply made and do not cut well.

_________________
Sylvan
http://www.wellsguitars.com
Top
 Profile  
 
tippie53
 Post subject:
PostPosted: Mon May 02, 2005 9:05 am 
Offline
Koa
Koa

Joined: Thu Feb 17, 2005 3:38 pm
Posts: 1542
Location: United States
   I actually used cut nails when I first started and ground the taper in I wanted. I put them into a variable speed drill and they worked very well. I guess if I did that today on a cutomers D45 I would have to call 911 LOL.
I can't complain about the Grizzly tools. I have had great luck and if I wan't happy they allways replaced them or refunded my money.
I agree that ones out of a machinist catalog would be much higher end as they are HSS or TI coated


Top
 Profile  
 
Dave Rector
 Post subject:
PostPosted: Mon May 02, 2005 9:10 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Feb 12, 2005 1:07 am
Posts: 2281
Location: Jones, OK
I have a set of the Grizzly reamers and they seem to work fine for me. The price was right too....

_________________
Dave Rector
Rector Guitars
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 17 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com