Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon May 19, 2025 11:49 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject:
PostPosted: Fri Feb 09, 2007 12:50 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
Hey guys, I sprayed the first coat of lacquer and this yellowish stain appeared.I glued the rosette in with tightbond and brushed shellac in the channel.Any ideas' what it is and will it sand out?

_________________
Anderson Guitars
Clearwater,Fl. 33755


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 09, 2007 1:32 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
Thanks Hesh, Yeah I heard that Ca would do this.But I used titebond so I hope it does sands out.

_________________
Anderson Guitars
Clearwater,Fl. 33755


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 09, 2007 5:34 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
Dave, to me it looks like the purfling bled for some reason. Did you apply the shellac after the rosette was done or before?
Try scraping with a razor blade and see if its removing any part of the stain.
If in fact bled, then appliyng an epoxie on the top will not hide the stain (don't ask how I know)
Best suggestion:
black top like Hesh's Tiger myrtle guitar!

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 09, 2007 5:47 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jun 10, 2005 9:51 am
Posts: 2148
Location: San Diego, CA
First name: Andy
Last Name: Zimmerman
City: San Diego
State: CA
Zip/Postal Code: 92103
Country: United States
Focus: Build
CA will definitely do this. I had it happen on a guitar even with a vinyl sealer
on i.

_________________
Andy Z.
http://www.lazydogguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 09, 2007 11:50 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8553
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Dave, if this appeared - after - you applied finish, I suspect that it may be some residual glue on the surface that didn't get sanded off and the lacquer is allowing it to show, or darken different than the wood around it. I would follow the above advise and at least try to sand it back a little.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 10, 2007 12:07 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
Thanks a lot guys. I brushed the shellac on the channel very well I thought so thats why I was surprised this showed up. I'll sand it back and start again.

_________________
Anderson Guitars
Clearwater,Fl. 33755


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 11, 2007 2:14 am 
Offline
Contributing Member
Contributing Member

Joined: Tue Jan 03, 2006 1:47 pm
Posts: 1624
Location: United States
First name: Larry
Last Name: Hawes
Focus: Build
Status: Amateur
Dave,

I'm curious - did you get that stain out? And did you figure out its origin?

_________________
Thank You and Best To All


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 11, 2007 2:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
Yeah, It came out with some sanding. I don't know how it happened but it's gone now! I'll be even more careful with the next rosette glue-up .Thanks fer asking Larry.

_________________
Anderson Guitars
Clearwater,Fl. 33755


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 11, 2007 2:42 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Dec 25, 2005 6:32 am
Posts: 7774
Location: Canada
Good job Dave, happy it turned out well for ya!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 11, 2007 3:30 am 
Offline
Contributing Member
Contributing Member

Joined: Tue Jan 03, 2006 1:47 pm
Posts: 1624
Location: United States
First name: Larry
Last Name: Hawes
Focus: Build
Status: Amateur
[QUOTE=DaveAndy] Yeah, It came out with some sanding. I don't know how it happened but it's gone now! I'll be even more careful with the next rosette glue-up .Thanks fer asking Larry.[/QUOTE]

Hey thank you for the follow up

_________________
Thank You and Best To All


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com