***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed May 21, 2025 4:00 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 16 posts ] 
  Print view Previous topic | Next topic 
Author Message
LanceK
 Post subject:
PostPosted: Tue Apr 17, 2007 4:07 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8553
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
About two weeks ago while closing up this guitar a timely crack appeared on the side of the lower bout. ARRRGG!!! I had no choice but to take two steps back and start again,
I had a matching set of sides so it was only a matter of time, and not materials, that was until I tried to remove the back from the cracked set of sides.

That did not go well

So, I was on the hunt for some more Coco. Brock Poling came up with a fantastic replacement set for me. My customer specified a sapwood center strip, that is indeed what we got. Here are some current progress shots. With a little luck, I should be back on track by this weekend.
The timing is bad, since HGF is approaching fast, but I really had no alternative, this one has to take priority, and son-of-gun if it ain't fighting me all the way!






New back with sapwood




Braces glued on with epoxy,




New OMFS mold with new side set.

I managed to knock this set of rims and the back out in a weekend + a day, that is a record for me! Its what can happen if the KIDS leave me along

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
Bill Greene
 Post subject:
PostPosted: Tue Apr 17, 2007 4:19 am 
Offline
Koa
Koa

Joined: Wed Jun 01, 2005 6:35 am
Posts: 1325
Location: Kings Mtn., NC, USA
First name: Bill
Last Name: Greene
City: Kings Mountain
State: North Carolina
Zip/Postal Code: 28086
Country: USA
Focus: Build
Status: Amateur
Fret not Lance...I've heard that horses that are hardest to break make the most spirited, loyal steeds. If this guitar is fightin' you, maybe that's indicative of how great it's going to be.

_________________
Eagles may soar, but weasels don't get sucked into jet engines.
Top
 Profile  
 
robertD
 Post subject:
PostPosted: Tue Apr 17, 2007 5:02 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Dec 07, 2006 11:37 pm
Posts: 499
Location: United States
Lance, I really like your set up! I’m gonna have to get, or make a mold one of these days.

That coco back looks outstanding, and I love the sapwood center strip!

Curious though, why reverse kerfing on one edge but, not the other?

Also, I’ve not seen braces shaped like that before, could be just me, seeing something in the
pictures not exactly right, but, they do look a little beefy. I’m sure you planned it that way for a
reason. Just wondering!

Robert

_________________
Everything has beauty, But, not everyone see's it!
Top
 Profile  
 
LanceK
 Post subject:
PostPosted: Tue Apr 17, 2007 5:14 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8553
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Robert,
the braces are beefy right now, I glue them on full width and profile them after there dry, but before I put the center strip in.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
John K
 Post subject:
PostPosted: Tue Apr 17, 2007 5:36 am 
Offline
Koa
Koa

Joined: Tue Mar 14, 2006 11:42 pm
Posts: 565
Location: United States
I feel your pain Lance. It is just wierd how some guitars fight you all the way to the end. I have a retop to do that is just one more thing with an OM that I'm building. Darned thing is finished, Tony did a great job, but the crack in the top is going to make me have to replace it.



Top
 Profile  
 
LanceK
 Post subject:
PostPosted: Tue Apr 17, 2007 6:19 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8553
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Ouch! John, I sure hope this isn't that beautiful Cedar topped Brazilian cutaway you just finished?

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
Mark Swanson
 Post subject:
PostPosted: Tue Apr 17, 2007 6:37 am 
Offline
Koa
Koa

Joined: Thu Jul 07, 2005 1:15 am
Posts: 575
Location: United States
Lance- looks good, but no fair! Show us the cracks and the messed up back, too! <G>?

_________________
Mark Swanson
Swanson Guitars
http://www.MarkSwansonMusic.com
Image
Top
 Profile  
 
Kim
 Post subject:
PostPosted: Tue Apr 17, 2007 9:37 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 18, 2005 2:21 am
Posts: 2924
Location: Changes when ever I move..Australia
Focus: Build
Status: Amateur
Looking good Lance, that certainly is a very nice bit of Coco.

Cheers

Kim
Top
 Profile  
 
Dave Anderson
 Post subject:
PostPosted: Tue Apr 17, 2007 10:53 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
Lance, Looks good but that wide sapwood,I don't care for myself.I don't mind a small strip in the center but this is too much IMHO. Good luck with the rest of this build,I hope it goes smoothly for you.

_________________
Anderson Guitars
Clearwater,Fl. 33755
Top
 Profile  
 
LanceK
 Post subject:
PostPosted: Tue Apr 17, 2007 11:51 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8553
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Dave, I totaly know where your coming from, but for me, the more the merrier!

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
Tim McKnight
 Post subject:
PostPosted: Tue Apr 17, 2007 12:18 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1532
Location: Morral, OH
Hmmm, just another reason to consider "double sides" ;)

_________________
tim...
http://www.mcknightguitars.com
Top
 Profile  
 
Howard Klepper
 Post subject:
PostPosted: Tue Apr 17, 2007 12:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692
I would be nervous about that sapwood. Seen it check too many times.

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.
Top
 Profile  
 
Andy Zimmerman
 Post subject:
PostPosted: Tue Apr 17, 2007 12:50 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jun 10, 2005 9:51 am
Posts: 2148
Location: San Diego, CA
First name: Andy
Last Name: Zimmerman
City: San Diego
State: CA
Zip/Postal Code: 92103
Country: United States
Focus: Build
Tim
you are right. I LOVE the double sides

_________________
Andy Z.
http://www.lazydogguitars.com
Top
 Profile  
 
Kristopher10
 Post subject:
PostPosted: Tue Apr 17, 2007 2:30 pm 
Offline
Mahogany
Mahogany

Joined: Tue Jul 26, 2005 1:06 pm
Posts: 82
Location: Germany
First name: Kris
Last Name: Barnett
Very nice wood selection...I like the sapwood.. I sincerely hope things go better for the remainder of the instrument. I hate when *crap* like that happens. It can kill your motivation.
Top
 Profile  
 
John K
 Post subject:
PostPosted: Tue Apr 17, 2007 8:50 pm 
Offline
Koa
Koa

Joined: Tue Mar 14, 2006 11:42 pm
Posts: 565
Location: United States
Thanks for YOUR concern Lance. No, in my case it was not the Cedar/Braz guitar, but another with an AD top which I hated to waste, not to mention the work and finishing cost.

Your new coco looks great and I will wager the customer is getting a prettier instrument for all of this.

One weekend and a day is really moving.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 16 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com