Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Dec 12, 2024 7:02 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject:
PostPosted: Sat Apr 28, 2007 8:36 am 
Offline
Koa
Koa
User avatar

Joined: Wed Apr 18, 2007 6:46 am
Posts: 1012
Location: Issaquah, Washington USA
I have some 1/4 " OD, 1/8" ID carbon fiber rod that I had bought for my kite.  Would these work for strengthening the neck of my ukes?

_________________
A higher purpose for wood.
Rich Smith
Issaquah, WA


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 28, 2007 12:19 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 18, 2005 2:21 am
Posts: 2924
Location: Changes when ever I move..Australia
Focus: Build
Status: Amateur
[QUOTE=Ricardo] I have some 1/4 " OD, 1/8" ID carbon fiber rod that I had bought for my kite.  Would these work for strengthening the neck of my ukes?
[/QUOTE]

These are no good. You really need solid form rectangular section as described above as there is far too much flex in round tubing.

Have a look at the Los Alamos Composites Web Site, best price and the right stuff.

Cheers

Kim


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 28, 2007 6:42 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Jan 05, 2005 6:25 pm
Posts: 2749
Location: Netherlands
Oh, I don't know about 'no good'; I know of at least two builders who use tubes in their necks. They add a bit of stiffness, even things out, but not crazy amounts to already stiff neck woods.

Rectangular sections will add more stiffness, and I'm not planning on switching from 1/8" x 3/8" any time soon; just bought myself 30 rods from LAC recently, great stuff, great service, price was definitely right and the quality's right up there!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 28, 2007 7:56 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 18, 2005 2:21 am
Posts: 2924
Location: Changes when ever I move..Australia
Focus: Build
Status: Amateur
I have some of the round graphite rods or tubing from a hi performance kite and some of the LAC solids, there really is no comparison. Whilst it is quite stiff, the tubing is designed to flex a little to load the cut of the sailcloth and shape the kite. The solid rectangular stuff from LAC does not flex much at all and it's rectangular form makes it much easier to fit.

I do agree that you could use round stock, but I just do not see much point, in a uke neck I do not see much point for using graphite period.

Cheers

Kim


Top
 Profile  
 
 Post subject:
PostPosted: Sun Apr 29, 2007 10:55 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2969
Location: United States
Thanks for the kind words everyone.
Jim

_________________
Jim Watts
http://jameswattsguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 30, 2007 12:24 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
I can't seem to find the Los Alamos composites site.
Can someone help?? thanks

_________________
Anderson Guitars
Clearwater,Fl. 33755


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 30, 2007 12:27 am 
Offline
Mahogany
Mahogany

Joined: Sun Feb 04, 2007 9:24 am
Posts: 41
Location: SE Michigan
Dave -

There's a link right at the top of this page - middle column, seventh one down.


_________________
Rick Jones
Rochester Hills, MI
http://home.comcast.net/~rajones19


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 30, 2007 1:36 am 
Offline
Koa
Koa
User avatar

Joined: Wed Apr 18, 2007 6:46 am
Posts: 1012
Location: Issaquah, Washington USA
My kite rods have a 1/16" thick wall so there is no flex. You are probably correct that a uke doesn't need a carbon fiber reinforcement.

_________________
A higher purpose for wood.
Rich Smith
Issaquah, WA


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 30, 2007 3:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
Thanks Rick . It wasn't working earlier....

_________________
Anderson Guitars
Clearwater,Fl. 33755


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 41 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com