Official Luthiers Forum!

Hi Folks,

Here is what I dug up to offer:

25 Assorted Martin Mahogany Neck Blanks. Most are 25.4" scale Dreadnought, with and without Diamond Valutes, most have dovetail ends, some have 3/4" tenon. All have Rosewood headplate veneer and Martin truss rod grooves. Each neck is very usable, however they are factory seconds due to chipouts, tight knot or tiny worm holes. The prices are $25.00 each. I can offer a few necks with Martin truss rods and Mahogany neck blocks for $45.00.


I have a Martin Neck as removed from an OM. Vintage Vee profile, 25.4" scake with trussrod, ebony fingerboard w/ 'Diamons=ds & Squares' markers and Grover Gold Vintage Style Tuners. Dovetail end. Make Offer

Martin D Top, Italian Alpine Spruce, Style 45 rosette w/ Abalone Pearl. This is a Martin Factory second due to small spots of irregular grain. VERY NICE and usable. Thickness is .110" Make Offer



Martin D-28 Top. Soundhole rosette installed. Back is marked for bracing. Very Nice. Make Offer.


Indian Rosewood Dreadnought Back & Sides. Martin Factory Parts. Back is jointed with HD-28 Zig-Zag backstrip. Matching sides are bent to Martin D Size. Nice, dark Indian Rosewood.

Please feel free to make offers, ask questions or tempt me with trades. I'm easy.

Mike

I have a few more Items to offer:

L.R. Baggs Active I Beam Pickup. Complete with Installation tools, instructions, battery holder, etc. I removed this pickup after using for only a few weeks. Make Offer

Stewart Macdonald Nut Files. Used and in excellent condition. 4 files total Stew MAc #4541, 4542, 4543 & 4544 for cutting slots from .016 to .060. http://www.stewmac.com/shop/Tools/Files/Double-edge_Nut_File s.html $50.00

Stewart Macdonald Double Sided Fret File #4590. For Medium & Fine Fret Wire. Practically Unused http://www.stewmac.com/shop/Tools/Files/Double-edge_Fret_Fil e.html $25.00

Stewart Macdonald "Martin Style" Truss Rods (2 each) #1177. Offer

Steward Macdonald Resonator Guitar Tail Piece #1533 Brand New in Package

Resonator Cone and Spider Bridge (2 each) Martin Factory Parts, Unused. Make Offer

Pictures on request.

Mike

Hi Mike,

I would like the nut files. $50 is fine, if you want to trade for anything that is cool too.

_________________
Burton
http://www.legeytinstruments.com
Brookline, MA.

Whoops.  Mike, I would like two Martin necks with the 3/4 tenon and the StewMac fret file...if possible.

Thanks,

Chris

Would you take $20.00 each for all of the necks that you have left? If so, I will take all of them.

_________________
tim...
http://www.mcknightguitars.com

Hi Mike-

You have a PM. I'm interested in the Alpine top and a couple of the necks.

Thanks-
John

_________________
John Lewis
Wannabe builder owned by 2 crazy dachshunds

Mike, I will take 2 guitar necks with the 3/4" tenon please

I will PM with my info

davidO

Mike, I will take them with the Diamond Valute if possible.

I'll take 8 necks, you pick them.

_________________
Reguards,

Ken H

I'll take the fret file.

I’m interested in the;
Martin D-28 Top,
The Indian Rosewood back & sides, and
A mahogany neck, if I can convert it to a bolt on?

Robert

_________________
Everything has beauty, But, not everyone see's it!

Will $50 for the removed Martin neck with fretboard and gold grover tuners work for you?

_________________
Dave Bland

remember...

"If it doesn't play in tune...it's just pretty wood"

L.R. Baggs Active I Beam Pickup.

Thanks Mike, I sent you a test money payment since I got here late tonight and wasn't sure of your account. Sounds like a deal. Many thanks, Bruce

_________________
http://www.dickeyguitars.com

Here are the takers so far:

John Lewis - Italian Alpine Top & 2 Necks
Burton LeGeyt - Nut Files
Robert Dobbs - I.R. Back & Sides Set, D-28 Top, Tenon Neck & Martin Neck Assembly.
David O - 2 Necks
Ken Hodges - 8 assorted neck blanks
Bruce Dickey - L.R. Baggs Pick up
Chris Campbell - 2 necks & fret file (Chris, I have not heard from you regarding your confirmation & shipping address. Does anyone have an email address for Chris?) Chris, I have not heard from you regarding your confirmation & shipping address. Does anyone have an email address for Chris?)

Thank you Tim McKnight, Joe White & Dave-SKG for your offers. I regret that I can't meet them.

My remaining items are the Resonator cones w/spiders, Resonator Tail Piece & Martin Truss Rods.

Thank you all for your purchases. What a great idea this swap meet was!!!

MJF

Hey Mike, just sent a pm (also an email)
Here's my email:  no_radio@yahoo.com.

Thanks,

Chris

Mike,

I think, I could use two more necks!(PM'ed you)

Robert

_________________
Everything has beauty, But, not everyone see's it!

I am still waiting for David O'Halloran to get back to me regarding the 2 necks he wanted. Does anyone have an email address for him?
Mike