Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Dec 12, 2024 12:19 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 34 posts ]  Go to page 1, 2  Next
Author Message
 Post subject:
PostPosted: Fri May 18, 2007 1:41 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada
I know that many of you frequent the Acoustic Players Forum. I didn't until Tim McKnight suggested I look in on some of the stuff that was being said about a couple of John Greven's recent completions (I heard some news from a couple of others over the past while also). A 00 Lutz/Mahogany and a 000 Lutz/BRW. The guys over there that played them said great things about them. My initial thoughts were, well, they're Greven's, they got to be good anyway! So while I was looking in at the APF I got an e-mail from John looking for a few more sets (just weird how that happens ). After a bit of discussion about a few things he sent me this assessment of the wood combos and the recent guitars:

"I have found that the combo of your tops (the ones with excellent clear ping tone and good stiffness regardless of degree of quarter or cosmetics) coupled with the outstanding Adirondack brace stock from Old Standard in Fulton, MO is head and shoulders above any other guitar sounds in the modern world. I have played thousands of new guitars over the years and have never heard any that sound like mine with this top and top bracing. The closest thing to my ear are the exceptionally fine early to mid-1930s Martin vintage guitars. Even here, the new guitar has the edge on tone quality with a greater complexity and character than the more fundamental tone of the early Martins. Lutz does rock.

John"


Wow, I thought that was a pretty good endorsement indeed! But even better, I just got off the phone with John and he said that just believing the words isn't enough....that little 00 that is in on the road in Texas will be making it's way up here in the next week or so! He even said that I could 'look under the hood'. "No secrets" he says "just typical vintage Martin bracing". I will let you know when it arrives and I and few of my friends give it a test drive before I send it back to him.

I am stoked yet again!

Shane

_________________
Canada


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 18, 2007 2:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 03, 2005 7:40 am
Posts: 2694
Location: United States
First name: John
Last Name: How
City: Auburn
State: Ca
Country: USA
Very cool Shane, that was one of the guys I mentioned was raving about your wood when I asked you to send me a few the other day. So don't go giving away all your best stuff to Mr Greven now!!!

Keep a few sets for the rest of us mortals

_________________
Tickle your guitar daily, and it'll tickle you back.


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 18, 2007 3:42 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
That is really outstanding Shane.  It's really got to make you proud of the quality of wood you are providing out there.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 18, 2007 4:25 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

So, remind us... when are you getting more lutz in?   

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 18, 2007 5:02 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada
[QUOTE=John How] Very cool Shane, that was one of the guys I mentioned was raving about your wood when I asked you to send me a few the other day. So don't go giving away all your best stuff to Mr Greven now!!!

Keep a few sets for the rest of us mortals [/QUOTE]

Hey John I have your sets together and will be filling all of the orders outstanding for mailing on Tuesday (Monday is Holiday here, the birthday of the late Queen Victoria). As for competition from John Greven, there really isn't much (except Todd Stock!), he prefers structure over appearance and takes lower grade sets. As noted in the quote, he is not even too concerned about being bang on quarter (my hand split billets run off quarter at the outer edges but not by too much). Most of his guitars are bursted so he can hide a lot. When I talked to him today he told me that his tops are a bit thicker but his braces are very light. So he likes light and stiff woods for the tops and prefers adi brace stock but is going to try some Lutz that I send him and he said that he will let me know how it compares.

Thanks

Shane

_________________
Canada


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 18, 2007 5:26 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada
[QUOTE=Brock Poling]
So, remind us... when are you getting more lutz in?    [/QUOTE]

Brock,

I am glad you brought this up!! I have a license to harvest but it expires in August. Last year I bought some logs and harvested a couple. Most of my production though was from those purchased logs as they were wonderful! I usually get about 700 sets from the logs I harvest or puchase. I have a tentative deal in the works to purchase logs from a local company on an ongoing basis, and they have tenure from the very same place where my purchased logs were harvested, but it makes me nervous not being in control of my supply of wood. Most of this wonderful spruce is slated for export, primarily to SE Asia. I am not certain what it is used for there but some likely goes to instruments but most to other things. Many of the companies here use these big logs as bargaining power for large volumes of lower grade logs, we are talking frieghter loads here, thousands of truck loads! So it is difficult to convince these companies to support local value added projects. Compounding the problem is a government that tailors legislation to the large logging companies so they squeeze the low volume high quality guys out. Anyway, my license had an extension clause in it that would allow me to harvest until about 2013 or 2014. I have been told that Forestry will not allow for that extension. I plan on making application for extension in the next week or two and if what I hear is true and it is rejected, I am hoping to receive letters of support from you all, and some of my other customers from around the world, to show this government that this wood has a better purpose that pulp and 2x4's and they really need to allow for increased value added opportunities. Almost all of this wood resides on public lands that are stewarded by the Forests Ministry so they can indeed set legislation and policy to support the development of these types of industries. Larry Stamm has been waging this battle for a while but to be successful we really need to show the decision makers that there is not just a desire to have access to this wood, there is a NEED! I truly believe that our use of this wood is a noble extension that honours the life of these ancient giants. You need to know we are not alone in this. I have a friend that manufactires wooden aircraft components and he is now building fencing materials and pallets in between the rare times when he can get sutable logs. Sorry to be long winded, but I feel a heated battle coming on and I am hoping to find support in our community!

Even still, I will be continuing, as Tony Karol so aptly states "Nothing is impossible, it just costs more". I am hoping that we can be success in patitioning the decision makers so that it dosen't cost too much more!

Thanks

Shane

Oh Ya!! To answer your question, I have a new tree under application right now. No issue appearantly in getting the tree, just waiting for the paperwork, they say another week or so. I can't promise what the tree holds in store, I have a series of things I look for when selecting trees but you never really know what you have until some sets are cut, dried and sanded! Every step towards the finish though gives you a stronger sense of what you have. I will be sure to post progress once I get started. It has been an INCREDIBLY long winter here. I know of another grove of trees that we are in talks about but there is still too much snow to look at them again. Soon though!

Shane

_________________
Canada


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 18, 2007 10:48 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 18, 2005 2:21 am
Posts: 2924
Location: Changes when ever I move..Australia
Focus: Build
Status: Amateur


Who can make a wood chip sing?

Good luck Shane, we all dearly rely upon you winning the good fight.

Cheers

Kim


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 12:34 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jul 05, 2005 10:53 pm
Posts: 2198
Location: Hughenden Valley, England
Shane,

Congrats yet again and deserved recognition for great wood. John Greven is right - Lutz rocks.

Count me in as well for any help with the Canadian Government lobbying on your behalf.

As for bracing I've used the Lutz bracing you sent on the two Weissenborn builds and on Jack the Lad. I haven't seen any adirondack bracing and can't comment on how it compares but your Lutz is indestinguishable from the Euro I've been using up to now for bracing and is fabulous stuff. It's what I'll be using on my instruments for bracing from here on. John Greven will love it I'm sure.

_________________
Dave White
De Faoite Stringed Instruments
". . . the one thing a machine just can't do is give you character and personalities and sometimes that comes with flaws, but it always comes with humanity" Monty Don talking about hand weaving, "Mastercrafts", Weaving, BBC March 2010


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 12:58 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jun 13, 2005 6:53 am
Posts: 2104
Location: Toronto, Ontario, Canada
First name: Anthony
Last Name: Zlahtic
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
[QUOTE=ToddStock] Shane:
I'm there for you - please PM me with address and the name of the appropriate Forestry Service manager, or if Lance does not mind, post it in this thread.

Letters take time to line up (DAMHIKT), and you'll want to generate a 'talking points' outline so that key points are addressed in the letters of support (e.g., benefit to Canadian economy; world-class reputation for Canadian forest products; best use of scarce resources; low environmental impact of harvest methods, etc.); happy to help you out with an early draft.
Todd[/QUOTE]

Shane you can count me in to send a letter. Picking up on Todd's thoughts, I'd add how the use of spruce contributes to the arts. Something I believe our government strongly supports. I very much doubt that many of our government officials are even aware that spruce or Lutz spruce is used in building guitars. Moreover, that the big logging companies do not support the use of spruce in art for guitar building.


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 3:16 am 
Offline
Walnut
Walnut

Joined: Fri Jan 05, 2007 2:46 pm
Posts: 11
Location: Canada
Hi Shane,

I'm there for you too when the time comes to begin a letter writing campaign. Unfortunately I disagree that the government supports the arts enough, unless they see votes in it for them. But your entrepreneurial endeavor is a viable business plan - you should qualify for some kind of grant support from either the provincial or federal government (or both) especially now that you've established the foundation and market demand for your products.

Greg


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 3:46 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
That makes me cringe when I here all that wonderful Lutz
spruce being cut into 2 by 4's. You can count on a letter or letters from me Shane! Good Luck with your extension .I hope they give it to ya! And congrats on great recognition from John Greven!

_________________
Anderson Guitars
Clearwater,Fl. 33755


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 3:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2969
Location: United States
Shane,
I'll also write a letter for you. I've tested several of the your tops and they are amazing, particularly in the cross grain direction.
Stash some aside for me please.

_________________
Jim Watts
http://jameswattsguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 3:52 am 
Offline
Cocobolo
Cocobolo

Joined: Wed Dec 29, 2004 7:25 am
Posts: 458
Location: Southern Ohio
I'll send a letter too, Shane. Just let me know when and where to send it.


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 5:07 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jan 08, 2005 3:37 am
Posts: 2670
Location: United States
First name: John
Last Name: Mayes
City: Norman
State: OK
Focus: Build
Status: Professional
Lutz is my favorite topwood without question.


_________________
John Mayes
http://www.mayesluthier.com


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 9:33 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada
Thanks for the kind words and support you all. I will be working on a draft document for presentation in the next couple of weeks. What I will be hoping to do is be able to attach as many seperate letters of support for better access to this resource for our industry as I can get. Todd, I will take you up on your offer to help out a bit on this. I do presentations a lot for my day job and they include lots of in depth research but it is ALWAYS great to have an extra set of eyes to shed a perspective that being too close can't see. I am going to start to pull a bunch of stuff together this for proposal. When I am getting things ready to go I will start another thread, after I ok it with Lance and Brock (Am I moving in to the 'no politics' arena here... might be, so I will seek permission first) and will outline the 'talking points' that Todd has eluded to.

Thanks again all!

Shane

_________________
Canada


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 9:50 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Mar 06, 2006 10:10 pm
Posts: 2485
Location: Argyle New York
First name: Mike/Mikey/Michael/hey you!
Last Name: Collins
City: Argyle
State: New York
Zip/Postal Code: 12809
Country: U.S.A. /America-yea!!
Focus: Build
Status: Professional
Count me in on any help you need Shane !!!

I'm glad i got alot of tops from you last year !
Plus I think your brace stock is the best !
I have Adi -your's is just as good or better because of it's weight to stiffness ratio !!!!


Mike Collinswww.collinsguitars.com

_________________
Mike Collins


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 11:22 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Shane, I think I'll be needing to get me some more firewood soon, so I think the best fire wood for me must be up in Terrace eh?

I'll give you all that quarter sawn stuff (leaves klinkers in the stove so it's really no good ) and just take the rest.

Put me on the list for letter sending.

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 1:09 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Nov 11, 2005 3:32 am
Posts: 2683
Location: Ithaca, New York, United States
Just wanted to chime in with my support for what you're doing, Shane. I'll keep my eye out for your posts on this subject and hope to be able to support your efforts.


_________________
Todd Rose
Ithaca, NY

https://www.dreamingrosesecobnb.com/todds-art-music

https://www.facebook.com/ToddRoseGuitars/


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 2:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Don't know of those of us who are just starting can help, but sure am willing to if I can.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 3:22 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada
[QUOTE=Rod True] Shane, I think I'll be needing to get me some more firewood soon, so I think the best fire wood for me must be up in Terrace eh?

I'll give you all that quarter sawn stuff (leaves klinkers in the stove so it's really no good ) and just take the rest.

Put me on the list for letter sending. [/QUOTE]

Man!! You really don't want to see what we heat the shop with in the winter! I almost cry!! Too bad more people aren't closer to me! I do take a lot of it and resaw it into small box pieces for a friend of mine that does these boxes for the tourist trade in Prince Rupert, smoked salmon in a nice spruce and cedar box with some cool native art on the top. Makes me feel better knowing that the wood is being used even further! I actually spent three hours cutting more up for him today.

_________________
Canada


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 4:21 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jun 13, 2005 6:53 am
Posts: 2104
Location: Toronto, Ontario, Canada
First name: Anthony
Last Name: Zlahtic
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
Ah heck Shane, it's Canadian politics so it should be ok

Look forward to seeing the first cut!


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 19, 2007 5:06 pm 
Offline
Koa
Koa

Joined: Mon Sep 04, 2006 10:55 pm
Posts: 698
Location: Australia
AIf there's anything Dave and I can do just let us know Shane.

Cheers

_________________

------------------------------------------------------
Bob Connor
Geelong, Australia


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 20, 2007 1:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Sep 09, 2005 7:51 am
Posts: 3786
Location: Canada
You can add my name to the list as well Shane ... anything to help out, we NEED this stuff, and where better to get it from than our OWN back yard.

_________________
Tony Karol
www.karol-guitars.com
"let my passion .. fulfill yours"


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 20, 2007 3:19 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Feb 12, 2005 1:07 am
Posts: 2281
Location: Jones, OK
Shane, count me in for support as well. Let me know what you need and when you need it and I'll do whatever I can. We need to do everything we can to keep that beautiful lutz in the supply chain.

_________________
Dave Rector
Rector Guitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 34 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 61 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com