Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

Martin neck needed !!!

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

WalterK

Post subject:

Posted: Mon May 21, 2007 4:23 am

Koa

Joined: Sat Jan 15, 2005 7:24 am
Posts: 830
Location: United States

HELLO FRIENDS!!
Does anyone have a used Martin 6 string neck?
I desperately need a neck in good condition.
I prefer a 1 3/4" width at the nut, but will take a 1 11/16". The Martin Logo is not needed.
A mortise and Tenon is a must, bolt on neck!!

Please help me out if you can.
Thanks,

walterK

Top

psl53

Post subject:

Posted: Mon May 21, 2007 4:31 am

Cocobolo

Joined: Tue Mar 20, 2007 3:45 pm
Posts: 206
Location: United States

walter,

I was looking on e-bay for a damaged martin and came across a D-18 neck. Wasn't interested, so I did look too hard. You may want to serch e-bay for Matrin Guitar and see what comes up.

Peter

Top

redennis3

Post subject:

Posted: Mon May 21, 2007 4:48 am

Cocobolo

Joined: Sun Feb 04, 2007 1:32 pm
Posts: 187
Location: United States

Hi Walter, I've got one I'll part with, it looks like its about 1 3/4 at the nut, I could be wrong

it is mortice and tenon,

Red

Top

redennis3

Post subject:

Posted: Mon May 21, 2007 4:50 am

Cocobolo

Joined: Sun Feb 04, 2007 1:32 pm
Posts: 187
Location: United States

Nope just checked, it is 1 3/4, but you wanted a used one, this one is new, does it matter? If I can help let me know.

Red

Top

Steve Saville

Post subject:

Posted: Mon May 21, 2007 5:11 am

Contributing Member

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States

Walter,
I have this posted in the OLF auction. Is that what you are looking for?
LMI part # WNCDMT M/T neck with inserts and Neck block.

If so, PM me.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.

Top

WaddyThomson

Post subject:

Posted: Mon May 21, 2007 5:56 am

Contributing Member

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro

Didn't someone have a bunch of Martin necks on the SWAP MEET?
They may have all been sold, or the wrong type.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars

Top

WalterK

Post subject:

Posted: Mon May 21, 2007 10:06 am

Koa

Joined: Sat Jan 15, 2005 7:24 am
Posts: 830
Location: United States

Hi Red,

New or used it doesn't matter!!
let me know what you would like for it.
Thanks,

walter

Top

Shawn

Post subject:

Posted: Mon May 21, 2007 12:06 pm

Contributing Member

Joined: Thu Jan 06, 2005 12:19 pm
Posts: 1051
Location: United States

Walter,

I have a Martin neck like the one Red has shown above. It is 1 3/4 but with no diamond volute as in the other batch of swap. It has the Martin neck block, threaded insert and bolt. It has EIR as the headstock veneer.

Someone gave it to me with a bunch of other stuff but I do not build Steel Strings (unless forced).

If you want it, it is yours for free...just tell me your address...if we are giving things away in swap deals, this is a deal...no strings attached (no pun intended).

Top

WaddyThomson

Post subject:

Posted: Mon May 21, 2007 12:44 pm

Contributing Member

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro

You are a Prince, Shane!
But we already knew that.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars

Top

Page 1 of 1

[ 9 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 56 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: