***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 5:38 am


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
joe white(old)
 Post subject:
PostPosted: Wed Jul 11, 2007 7:33 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Feb 05, 2007 3:55 am
Posts: 404
Location: United States

I need a little help with a jointer I found at a local industrial auction. It is an import (Taiwan) but very clean. I don't think it is very old. It is medium olive green and the id tag reads; Northwood (in red letters) It is labeled model CT-150D and it is a six inch. Its a one horse and has the cabinet style base. I have already tried it out on some cedar 1x6 I had laying around and it cut great. I'm sure it will be more than adequate to get tops and backs ready to join and I want to get new knives/blades for it but I can't find any info on it so far. I can post a pic if needed. Anyone have any info for me?
Top
 Profile  
 
Steve Saville
 Post subject:
PostPosted: Wed Jul 11, 2007 7:49 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
Joe,
Do not use that on your tops and backs! It will destroy them.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.
Top
 Profile  
 
JohnAbercrombie
 Post subject:
PostPosted: Wed Jul 11, 2007 7:51 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
[QUOTE=SteveS] Joe,
Do not use that on your tops and backs! It will destroy them.[/QUOTE]

Jointing the edge of top/back plates on a power jointer works just fine.
Now, if the OP had suggested putting backs through a thickness planer....

John


Top
 Profile  
 
JohnAbercrombie
 Post subject:
PostPosted: Wed Jul 11, 2007 7:54 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
Joe-
There are a lot of machines out there with different nameplates, but most of them are knockoffs of Delta/Rockwell machines, made in Taiwan.
Unless the blades are quite unusual, you can probably find replacements by just using the dimensions of your existing blades.
If you use a sharpening service, a question to them might get you results quickly.

Cheers
John


Top
 Profile  
 
JohnAbercrombie
 Post subject:
PostPosted: Wed Jul 11, 2007 7:59 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
Try-

http://www.westernapex.com/pdf-files/Bladesnbits-Com-Planer- Jointer-Blades.pdf
Top
 Profile  
 
WaddyThomson
 Post subject:
PostPosted: Wed Jul 11, 2007 8:00 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Joe, I did a Google search on Northwood Jointer, and got a link to what was, apparently, one of Northwood Tools' more popular items, a 6" jointer.  They are an Australian Tool Company, and still have a website, but I couldn't find a jointer on the site.  Probably something they had in the past, that they had their name put on.  I noticed, that another site was selling blades that would fit Grizzly and Northwood jointers.  Apparently they also have a Store in the US now too.  Maybe they would have some answers for you.


_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars
Top
 Profile  
 
joe white(old)
 Post subject:
PostPosted: Wed Jul 11, 2007 9:40 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Feb 05, 2007 3:55 am
Posts: 404
Location: United States

Thanks guys! I messed around with it a little more and found that the old owners had the fence set up in such a way that the first one inch of the 6 inch blades weren't ever used. I set it up to make use of that and got a very clean and precise cut. I also removed one of the blades and measured so I can find replacements. Wouldn't sharpening these be pretty tricky? seems that they would have to be pretty accurate from one blade to the next. I do have a lot of Amish craftsmen and sharpening services in my area, maybe I could give that a try?


Steve, you really mean not to use a jointer to create a clean and straight edge to join the two sides of a back or top? I thought this was an acceptable ( and controversial?) method?
Top
 Profile  
 
JohnAbercrombie
 Post subject:
PostPosted: Wed Jul 11, 2007 9:55 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
Joe-
You should be able to get several sharpenings out of a set of jointer blades- replacing them isn't necessary very often.
I just keep a second (sharp) set on hand and swap them out when needed.
Some jointers let you shift the blades sideways a bit; this can be handy if you get a 'nick' in the blades- shift one and you can get a reasonably smooth cut until you swap out the set.
There are also techniques/jigs for honing blades yourself, but I usually just get them sharpened professionally.

If you ask some of the local craftsmen, they should steer you to a good sharpening service.
Some of the 'sharpening' services can't be trusted with anything but lawnmower blades.
I found a bunch of CT-150 jointers on the web-perhaps like yours- they look like nice machines. I think the CT refers to the company in China that makes them.

Cheers
John


Top
 Profile  
 
Steve Saville
 Post subject:
PostPosted: Wed Jul 11, 2007 10:57 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
[QUOTE=joe white]

Steve, you really mean not to use a jointer to create a clean and straight edge to join the two sides of a back or top? I thought this was an acceptable ( and controversial?) method?

[/QUOTE]

Evidently some are successful at doing that. That's great and perhaps you will be good at it.
I use a shooting board and block plane.
I have a nice 6" jointer and I wouldn't use it for that.
I'm not saying I'm right and they are wrong.
There are many ways to do it. Some use a straight block with sandpaper and are very successful. I think I saw one gut using a table saw.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.
Top
 Profile  
 
crazymanmichael
 Post subject:
PostPosted: Wed Jul 11, 2007 2:27 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Feb 21, 2005 6:16 am
Posts: 2244
Location: United States
First name: michael
Last Name: mcclain
City: pendleton
State: sc
Zip/Postal Code: 29670
Status: Professional
if i was to choose between using a block plane or my jointer to join plates i would take the jointer any day. whilst i did try it once with a block plane it found it too short. the shortest plane i've been pleased with for the purpose was a no 4 smooth with the iron honed square, but my favourite is a no 5 jack. some prefer to use 6's and 7's. even read about a chap who used a no 8.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 15 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com