Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 9:46 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject:
PostPosted: Thu Sep 06, 2007 1:44 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida

I dont know where else to put this request, but since it is for such a small amount, I dont think it should ruffle any feathers??


I need a piece of fret wire that is slightly taller than normal fret wire. The best I can tell, my fret wire is .041 tall. I would like to have a piece about 2 1/2 to 3" long and about  .047 to .050 tall.


This is going to be used as a zero fret.


 


Can anybody help?


Ken


_________________
Reguards,

Ken H


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 06, 2007 2:05 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jul 13, 2006 6:17 am
Posts: 1937
Location: Evanston, IL
First name: Steve
Last Name: Courtright
Focus: Build
Status: Amateur
Ken

Send me your address in a PM, I have some left over jumbo wire.

Steve

_________________
"Building guitars looks hard, but it's actually much harder than it looks." Tom Buck


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 06, 2007 2:08 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 04, 2005 7:13 am
Posts: 3270
Location: United States
Ken, after I posted my first guitar with zero fret, using a bigger wire, I think it was Kevin that said there wasn't any need to use a different size for the zero fret. On my next three, I used the same size for the zero fret as all the rest and it works fine. There is no need for a taller fret.

Ron

_________________
OLD MAN formerly (and formally) known as:

Ron Wisdom

Somewhere in the middle of Arkansas......


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 06, 2007 2:45 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida

Hey Ron!


It was actually your post that got me wondering about a zero fret in the first place. I have not tried one as of yet, but right now I have a guitar that will be a charity fund raiser and I am going over the top on it. Thought I would try out the zero fret just to see how I like it. I am putting in an unusually thin nut, so if all else fails I can always saw out the fret and put a regular size nut in it's place.


Thanks for the advice on the zero fret wire too. I havent done this before, so I'm not sure what to expect. Steve is graciously going to send me a short piece of taller fret wire, so I'll have it if I need it. I'll try out the regular fret wire first though.


Thanks again!
Ken


_________________
Reguards,

Ken H


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 06, 2007 2:52 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Dec 03, 2005 10:04 am
Posts: 2060
A zero fret the same size as the rest of the wire is ideal in my opinion,
though if you prefer a slightly higher nut you can simply leave the zero fret
untouched when dressing the rest.

_________________
Eschew obfuscation, espouse elucidation.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 52 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com