***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 11:40 am


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 3
  [ 61 posts ]  Go to page 1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
Blain
 Post subject:
PostPosted: Sat Sep 22, 2007 6:15 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jan 07, 2007 1:14 pm
Posts: 761
First name: Blain
City: Leander
State: Texas
Country: United States
Focus: Build
I'm looking to spend around $150 for a good quality set of chisels.

Has anyone tried any of the Chisels that Woodcraft sells?

Any other reccomendations if Woodcraft is not reccomended?

_________________
Thanks,
Blain

http://www.ullrichguitar.com

"89.67% of all statistics are made up on the spot."
Top
 Profile  
 
Blain
 Post subject:
PostPosted: Sat Sep 22, 2007 6:59 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jan 07, 2007 1:14 pm
Posts: 761
First name: Blain
City: Leander
State: Texas
Country: United States
Focus: Build
Thanks Todd. I'm looking on the Tools for Working Wood site now.

Thanks for the reccomendation!

_________________
Thanks,
Blain

http://www.ullrichguitar.com

"89.67% of all statistics are made up on the spot."
Top
 Profile  
 
BlackHeart
 Post subject:
PostPosted: Sat Sep 22, 2007 7:05 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Jul 23, 2007 3:46 pm
Posts: 149
Location: United States

You will also need a strope and sharpening stuff! Havent seen much on keeping up with chisels. Ive gotten into the bad habbit of just using 1000 grit with olive oil every now and then. These need to be stroped with leather and jewlery polish. 
Top
 Profile  
 
BlackHeart
 Post subject:
PostPosted: Sat Sep 22, 2007 7:07 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Jul 23, 2007 3:46 pm
Posts: 149
Location: United States

Jewlers rouge. Sorry, hey where is the 'edit' button?


 


BTW, Anyone have a link for those little micro planes, there were posts a couple weeks ago? I used search but got nothing.
Top
 Profile  
 
John Mayes
 Post subject:
PostPosted: Sat Sep 22, 2007 8:20 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jan 08, 2005 3:37 am
Posts: 2670
Location: United States
First name: John
Last Name: Mayes
City: Norman
State: OK
Focus: Build
Status: Professional
another vote for two cherries chisels...I have a dozen or so of them and love
them all.

_________________
John Mayes
http://www.mayesluthier.com
Top
 Profile  
 
JohnAbercrombie
 Post subject:
PostPosted: Sat Sep 22, 2007 8:49 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
Blain-
If you're going to be using the chisels for instrument-building, you might want to take a look at the sort of chisels (paring chisels) that LMII sells.
Using a (hooped) chisel like the TwoCherries-designed for chopping with a mallet/hammer- for hand work is not something I'd enjoy doing, but others obviously differ.
For chopping work or building a boat, the TwoCherries would be just the ticket.
I bought 3 or 4 of the LMII-type chisels from Lewis Luthier before he sold out to LMI years ago- they are good quality and still my favourite tools for fine paring work.

Cheers
John
Top
 Profile  
 
JohnAbercrombie
 Post subject:
PostPosted: Sat Sep 22, 2007 8:51 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
Hesh got there first- I should learn to type faster!
That makes two votes for paring chisels designed to fit your hand, rather than designed to be hammered.


Top
 Profile  
 
WaddyThomson
 Post subject:
PostPosted: Sat Sep 22, 2007 9:13 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
I bought a set of 4 Crown Bench Chisels for about $50 +/- and like them pretty well.  They seem to hold an edge well, and they seem to work just fine.  I also have a Two Cherries 2mm chisel that is pretty nice.  I think I got it at Highland Woodworking.  If you want high end chisels, you can get Sorby, Aurion, Henry Taylor, Ashley Iles, and some others here.  You can get the 3 sizes mentioned of the Sorby Long Paring chisels for about $135.


_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars
Top
 Profile  
 
Arnt Rian
 Post subject:
PostPosted: Sat Sep 22, 2007 9:38 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
I will vote against the Sorby paring chisels, go with the Taylors instead (I have both). The Taylors hold a much better edge.

The Two cherries are fine, I have a full set. I also have some of their flat carving chisels, and my one LMI chisels looks a lot like on of them, save for the handle of course. Does anyone know who makes those chisels for LMI? Pfeil is about the same quality as two cherries IMO. I also like my inexpensive Japanese chisels, they are totally different but sure take a keen edge.

If you like old I can recommend Scandinavian carbon steel chisels with names like E.A Berg, Jernbolaget, Eskilstuna and Kongsberg, they are really great. On your side I guess you are more likely to find Bucks Brothers, Stanley and... (Todd can fill you in). Check out flea markets, old tool dealers and eBay for these.

I agree with what has been said about sizes, if I could pick one more it would be a 2-3 mm one for detail work.

_________________
Rian Gitar og Mandolin
Top
 Profile  
 
Jim Kirby
 Post subject:
PostPosted: Sat Sep 22, 2007 9:50 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue Nov 29, 2005 11:44 am
Posts: 2186
Location: Newark, DE
First name: Jim
Last Name: Kirby
Focus: Build
Status: Amateur
I'll go with Hesh on this one - I've never had much urge to use regular bench chisels for luthiery, and I like the feel of the LMI chisels for this work much better.

And, to throw in a suggestion from left field, I also like the long bladed paring chisels - I use these for most of the detail work in making bridges. Just added another Sorby to my collection the other day, but I had gotten by with the 1/2" and 3/4" for quite a while.

_________________
Jim Kirby
kirby@udel.edu
Top
 Profile  
 
Shane Neifer
 Post subject:
PostPosted: Sat Sep 22, 2007 10:03 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada
I'm with Jim, I quite like my Sorby paring chisels for shaving wood, I have four of them. I also have a full set of Hirsch, from Lee Valley, and a pretty complete set of Japanese chisels and I like them all as well. For sharpening I use 1000, 4000 and 8000 grit water stones, I have never noticed any difference on sharpness when I stropped a chisel so I haven't done that for years!

Good luck

Shane

_________________
Canada
Top
 Profile  
 
KenH
 Post subject:
PostPosted: Sat Sep 22, 2007 11:03 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida

Include me in with the Sorby chisels. I bought 3 of them on a day that woodcraft was having a 10% off sale and got them at a good price. They are the long paring chisels and I reccomend the long shanked chisels over the shorts any day.


The Sorby's hold an edge forever with just minimal care and they fit my hands well too. They are made in England.


Which ever chisel you get, I reccomend getting yourself a Veritas MkIII honing system and some of the abrasive papers to go with them. They will help you to keep a mirror edge on your chisels and the guide is really easy to work with also.


_________________
Reguards,

Ken H
Top
 Profile  
 
PDeWitt
 Post subject:
PostPosted: Sat Sep 22, 2007 11:12 am 
Offline
Mahogany
Mahogany

Joined: Thu Sep 20, 2007 7:39 am
Posts: 49
Location: United States
I am happy there is a discussion about chisels going on. I was just looking
for chisels today (getting tools together for my first guitar). My question is
this:

Have any of you ever used butt chisels for shaping braces? Any limitations I
should take into consideration? My hands tend to be a bit shaky and it
seems like I could do much more controled work with the blade closer to my
hand.

Also, should I buy a 1" or 3/4" chisel as my main brace-shaping chisel?

Thanks again for the great discussion.
Top
 Profile  
 
KenH
 Post subject:
PostPosted: Sat Sep 22, 2007 11:32 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida

[QUOTE=PDeWitt]Have any of you ever used butt chisels for shaping braces? Any limitations I
should take into consideration? My hands tend to be a bit shaky and it
seems like I could do much more controled work with the blade closer to my
hand.

Also, should I buy a 1" or 3/4" chisel as my main brace-shaping chisel?

Thanks again for the great discussion.[/QUOTE]


 


Chances are pretty strong that you would never use anything bigger than a 1/2" chisel. I have larger ones up to 1.5", but I never use them. Mine are 1/4, 3/8, 1/2 inches.


I want 2 more chisels. One of them a 3/8" curved shank for removing glue and the other a 3/16 or smaller chisel.... seems I am always needing a smaller one


The way you use the long shank chisels is to use your other hand as a guide, which is MUCH more stable than trying to do it one handed. Because of this, the short shanked chisels are harder to control than the long shanked ones.


_________________
Reguards,

Ken H
Top
 Profile  
 
jhowell
 Post subject:
PostPosted: Sat Sep 22, 2007 11:37 am 
Offline
Koa
Koa
User avatar

Joined: Wed Mar 29, 2006 11:21 am
Posts: 805
Location: United States
First name: Jim Howell
I have a set of Irwin chisels which work well, but do require sharpening a bit more often. These chisels from Lee Valley are first on my list when it comes time to spend a little tax refund this spring.

_________________
Jim Howell
Charlotte, NC
Top
 Profile  
 
PDeWitt
 Post subject:
PostPosted: Sat Sep 22, 2007 11:40 am 
Offline
Mahogany
Mahogany

Joined: Thu Sep 20, 2007 7:39 am
Posts: 49
Location: United States
Thanks for the advice, Ken!


Top
 Profile  
 
Steve Walden
 Post subject:
PostPosted: Sat Sep 22, 2007 12:00 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jul 28, 2007 1:03 pm
Posts: 724
Location: NE Oklahoma, United States
First name: Steve
Last Name: Walden
City: Bartlesville
State: Oklahoma
Zip/Postal Code: 74006
Country: USA
Focus: Build
Status: Amateur

[QUOTE=Hesh1956]EDIT "started buying some single chisels...."[/QUOTE]


Are they unmarried????


_________________
Steve Walden
Aspiring Builder,
Bartlesville, OK
Top
 Profile  
 
Jim Kirby
 Post subject:
PostPosted: Sat Sep 22, 2007 12:49 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue Nov 29, 2005 11:44 am
Posts: 2186
Location: Newark, DE
First name: Jim
Last Name: Kirby
Focus: Build
Status: Amateur
[QUOTE=PDeWitt] I am happy there is a discussion about chisels going on. I was just looking
for chisels today (getting tools together for my first guitar). My question is
this:

Have any of you ever used butt chisels for shaping braces? Any limitations I
should take into consideration? My hands tend to be a bit shaky and it
seems like I could do much more controled work with the blade closer to my
hand.

Also, should I buy a 1" or 3/4" chisel as my main brace-shaping chisel?

Thanks again for the great discussion.[/QUOTE]

I pretty much do all my brace shaping with finger planes - I have one of the Schneider planes from LMI, and it and one of the glue clearing chisels is pretty much what is on the bench when I am shaping braces.

JK


_________________
Jim Kirby
kirby@udel.edu
Top
 Profile  
 
John Lewis
 Post subject:
PostPosted: Sat Sep 22, 2007 1:30 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Oct 18, 2005 12:50 pm
Posts: 729
Location: United States
First name: John
Last Name: Lewis
City: Newnan
State: Georgia
Zip/Postal Code: 30265
Country: USA
Focus: Build
Status: Amateur
Blain-

Don't be afraid to look for used long paring and long firming chisels from the late 19th century until before WWII. You can find many online sites that deal with vintage tools and ebay can be ok if you find a good seller and you really educate yourself about the older makers of chisels.

I got a set of G.I. Mix long paring chisels (company from New England - defunct around the turn of the century) in 1/4", 3/8", 1/2" and 3/4" for less than $40 online. I have since filled in the other sizes for about the same amount with older Keen Kutter, Union, and Buck Bros chisels. I like the longer chisels and the handles fit my hands great.

Hope you find what works for you-


_________________
John Lewis
Wannabe builder owned by 2 crazy dachshunds
Top
 Profile  
 
John Lewis
 Post subject:
PostPosted: Sat Sep 22, 2007 1:38 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Oct 18, 2005 12:50 pm
Posts: 729
Location: United States
First name: John
Last Name: Lewis
City: Newnan
State: Georgia
Zip/Postal Code: 30265
Country: USA
Focus: Build
Status: Amateur
Blain-

Don't be afraid to look for used long paring and long firming chisels from the late 19th century until before WWII. You can find many online sites that deal with vintage tools and ebay can be ok if you find a good seller and you really educate yourself about the older makers of chisels.

I got a set of G.I. Mix long paring chisels (company from New England - defunct around the turn of the century) in 1/4", 3/8", 1/2" and 3/4" for less than $40 online. I have since filled in the other sizes for about the same amount with older Keen Kutter, Union, and Buck Bros chisels. I like the longer chisels and the handles fit my hands great.

I went overboard buying chisels. Ken is probably right, not a lot of need for more than a 1/4", 3/8" and 1/2".

Hope you find what works for you-


_________________
John Lewis
Wannabe builder owned by 2 crazy dachshunds
Top
 Profile  
 
RCoates
 Post subject:
PostPosted: Sat Sep 22, 2007 4:47 pm 
Offline
Koa
Koa

Joined: Thu Apr 07, 2005 2:38 pm
Posts: 632
Location: United States
First name: R
Last Name: Coates
City: Selma
State: CA
Focus: Build



It's easy to go overboard buying chisels. If I could only keep one set it would be the Two Cherries. The two and three mm sizes come in quite handy.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 3
  [ 61 posts ]  Go to page 1, 2, 3  Next

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 39 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com