Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

Tim’s Stuff

Page 1 of 2

[ 41 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

Tim McKnight

Post subject:

Posted: Sat Oct 13, 2007 12:24 pm

Contributing Member

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1524
Location: Morral, OH

Sold to Outstrung - Early 1950's Sitka Jumbo (outer side partially) carved top (nice) $75 shipped

Sold to Bradway Petersn 450 Strobe tuner in excellent condition $150 shipped

Black plastic end pins $5 shipped for the bag

Ebony end pins $1.50 each, shipped

White plastic end pins $5 for bag, shipped

5 sold to Westex93, 10 sold to Zehley, 10 to Jhowell, 10 to GregH. Lots more available Osage Orange bridge plates or bridge blanks, $1.50 each, shipped. Specify Quarter or rift sawn.

Classical size, Big Leaf Maple set, $40 shipped

sold to Zehley. Practice side sets, Ipe, Hickory, Pau Ferro, all $30 shipped

5 sets sold to Bradway. Price reduced to $15.00 for the remainder Neck hardware, $20 for box, shipped

1 Bag sold to kMartin, 1 bag to GregH. 2 bags left Neck, barrell bolts, $15 / bag, shipped

sold to Jim Hall Birdseye Maple practice sides (2) sets, $30 shipped

1 set eb & boxwood pins sold to Lex_luthiuer. Lots more left. *** PINS ARE UNSLOTTED *** RW, Ebony or Boxwood bridge pins, $5 / set shipped

Douglas Fir tops (tight grain), 8" x 20-3/4", 4 sets, $45 each shipped

Engelmann tops, tight grain and creamy white, $45/set shipped

2 Big Leaf maple Jumbo backs, dated 1958, $125 for both, shipped

Jumbo Big Leaf (outer) partially carved back, nice, 1950s, $75 shipped.

2 rolls of cloth bias tape, 1" wide by ? (long), $25 for both, shipped

Panama RW bridge blanks. 4 per bundle, $20 shipped.

1 unopened quart of satin finish (for necks). $20 shipped.

9 Ash practice sides. $25 shipped.

ALL SHIPPING IS BASED ON SHIPPING WITHIN THE CONTINENTAL US. I will combine shipping on multiple purchases (actual freight). Paypal preferred.

_________________
tim...
http://www.mcknightguitars.com

Top

Brock Poling

Post subject:

Posted: Mon Oct 15, 2007 1:03 am

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

Hey Tim...

I will lay claim to that LMI rosette cutter.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Peter Pii

Post subject:

Posted: Mon Oct 15, 2007 1:08 am

Cocobolo

Joined: Tue Jul 17, 2007 1:52 am
Posts: 140
Location: B.C. Canada

hi tim

i'll buy your rossette cutter

Top

Dave Rickard

Post subject:

Posted: Mon Oct 15, 2007 1:13 am

Koa

Joined: Tue Oct 17, 2006 3:52 am
Posts: 1263
City: Lawrence
State: Kansas
Zip/Postal Code: 66047
Status: Amateur

Tim I'l take the reamer

_________________
Say what you do, Do what you say.

Top

James Ringelspaugh

Post subject:

Posted: Mon Oct 15, 2007 1:18 am

Contributing Member

Joined: Mon Jan 08, 2007 3:47 pm
Posts: 1213
Location: Raleigh, NC
First name: Ringo

I'd like the ebony and boxwood bridge pins.

Top

L. Presnall

Post subject:

Posted: Mon Oct 15, 2007 1:29 am

Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States

Brace jigs Tim!

_________________
http://www.presnallguitars.com

Top

Steve Walden

Post subject:

Posted: Mon Oct 15, 2007 1:54 am

Contributing Member

Joined: Sat Jul 28, 2007 1:03 pm
Posts: 724
Location: NE Oklahoma, United States
First name: Steve
Last Name: Walden
City: Bartlesville
State: Oklahoma
Zip/Postal Code: 74006
Country: USA
Focus: Build
Status: Amateur

Tim - I will take all the bridge plates.

Thanks,

_________________
Steve Walden
Aspiring Builder,
Bartlesville, OK

Top

Marc Lupien

Post subject:

Posted: Mon Oct 15, 2007 2:50 am

Cocobolo

Joined: Wed May 16, 2007 12:39 am
Posts: 170
Location: Montreal, Quebec, Canada

Tim, could you give the dimensions of the Classical size, Big Leaf Maple set, $50 shipped ?

Thank's

Marc

Top

Chris Oliver

Post subject:

Posted: Mon Oct 15, 2007 3:23 am

Koa

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States

Tim, if you have any more sets of ebony or boxwood bridge pins, I'll take a set of each.
thanks,
chris

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...

Top

Tim McKnight

Post subject:

Posted: Mon Oct 15, 2007 3:48 am

Contributing Member

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1524
Location: Morral, OH

Do you want one set of each or all that I have?

_________________
tim...
http://www.mcknightguitars.com

Top

Tom Barton

Post subject:

Posted: Mon Oct 15, 2007 8:10 am

Contributing Member

Joined: Mon Feb 19, 2007 12:22 pm
Posts: 132
Location: Mattawan Michigan USA

Hi Tim -

I'll take the KTM9, if it's still available. (Don't tell Rick T.)

Thanks!

Tom

_________________
Tom Barton

Top

Burton LeGeyt

Post subject:

Posted: Mon Oct 15, 2007 9:06 am

Koa

Joined: Sat Aug 19, 2006 1:29 am
Posts: 1382
Location: United States

Hi Tim!

Is that the strobe tuner that will register tap tones off of a free plate or a box? I know there is one that will and then one that is mostly for high quality guitar tuning. If it is the one that will register tap tones, would i need an external mic for it?
Thanks,

Burton

_________________
Burton
http://www.legeytinstruments.com
Brookline, MA.

Top

L. Presnall

Post subject:

Posted: Mon Oct 15, 2007 11:09 am

Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States

Are you a Paypal man Tim? And if so, what's your Paypal name?

_________________
http://www.presnallguitars.com

Top

Tim McKnight

Post subject:

Posted: Mon Oct 15, 2007 12:30 pm

Contributing Member

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1524
Location: Morral, OH

Burton,
Yes, this is the one that can be used for tap tuning and it comes with a clip on transducer mic.

_________________
tim...
http://www.mcknightguitars.com

Top

Tim McKnight

Post subject:

Posted: Mon Oct 15, 2007 12:31 pm

Contributing Member

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1524
Location: Morral, OH

My Paypal addy is igolfat8 [at] yahoo [dot] com

_________________
tim...
http://www.mcknightguitars.com

Top

Tim McKnight

Post subject:

Posted: Mon Oct 15, 2007 12:35 pm

Contributing Member

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1524
Location: Morral, OH

[QUOTE=MLupien] Tim, could you give the dimensions of the Classical size, Big Leaf Maple set, $50 shipped ?Thank'sMarc
[/QUOTE]

Backs - 9" x 30"
Sides 5-3/4" x 29-7/8"

_________________
tim...
http://www.mcknightguitars.com

Top

Tim McKnight

Post subject:

Posted: Mon Oct 15, 2007 12:38 pm

Contributing Member

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1524
Location: Morral, OH

Items below are sold to:

Broc- Rosette cutter - $135.00
Dave Rickard - 3* reamer - $12.00
Larry P. - Brace jigs - $20.00
TomsOM28 - KTM9 - $50.00
Bradway - Tuner - $150.00
Lex_Luthier - 1 set of Ebony & Boxwood bridge pins - $10.00
Westex92 - 5 Osage bridge plates, rift- $7.50
kMartin - 1 bag barrel nuts - $15.00
Outstrung - Sitka archtop - $75.00
Jim Hall - Birdseye Maple sides - $30.00
J Howell - 10 Osage bridge plates, rift - $15.00

_________________
tim...
http://www.mcknightguitars.com

Top

outstrung

Post subject:

Posted: Mon Oct 15, 2007 12:47 pm

Mahogany

Joined: Tue Jan 16, 2007 7:40 am
Posts: 70
Location: United States

Tim, If you still have the spruce top available, Ill take it.

Top

Burton LeGeyt

Post subject:

Posted: Mon Oct 15, 2007 1:12 pm

Koa

Joined: Sat Aug 19, 2006 1:29 am
Posts: 1382
Location: United States

Tim,

Thanks for the update. Would you have any interest in a trade for one of the Sapele sets on my page? If you need close-ups it is no problem. If you want cash I will have to think about it but will probably still get it. I may need to ask some questions on how to use it. Thanks,

Burton

_________________
Burton
http://www.legeytinstruments.com
Brookline, MA.

Top

Tim McKnight

Post subject:

Posted: Mon Oct 15, 2007 1:13 pm

Contributing Member

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1524
Location: Morral, OH

Not really interested in trades at this point. I will be glad to offer some suggestions on how to use the tuner.

_________________
tim...
http://www.mcknightguitars.com

Top

Brad Way

Post subject:

Posted: Mon Oct 15, 2007 2:09 pm

Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States

Tim...I will take the tuner if still available.

Thanks!

_________________
Brad
Avon, OH

Top

Steve Saville

Post subject:

Posted: Mon Oct 15, 2007 2:11 pm

Contributing Member

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States

TIm,
What are the dimensions of your Osage Orange bridge plates?

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.

Top

Brad Way

Post subject:

Posted: Mon Oct 15, 2007 2:14 pm

Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States

I am also interested in your neck hardware but only need a few sets...maybe 5 total.

What can you offer?

_________________
Brad
Avon, OH

Top

James Ringelspaugh

Post subject:

Posted: Mon Oct 15, 2007 2:29 pm

Contributing Member

Joined: Mon Jan 08, 2007 3:47 pm
Posts: 1213
Location: Raleigh, NC
First name: Ringo

Sorry I wasn't clear Tim, I'll take one each of the ebony and boxwood bridge pin sets for a total of $10.

Top

Wes McMillian

Post subject:

Posted: Mon Oct 15, 2007 3:46 pm

Contributing Member

Joined: Sun May 29, 2005 7:17 am
Posts: 622
Location: Santo, TX

Tim, I'll take 5 osage bridge plates, if they're available, rift sawn.

Thanks!

_________________
Wes McMillian
Santo, TX
http://www.wesmcmillian.com

Top

Page 1 of 2

[ 41 posts ]

Go to page 1, 2 Next

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: