Official Luthiers Forum!

All proceeds net after shipping expense will be paid into the OLF. Because of the kindness of members here, not naming names, I hope this will benefit ALL.I'll do photos and then descriptions with prices.I have to go reduce sizes. mt

some pics.Trying to resize but none of my programs are doing it. I will keep trying.(1) 2 Ashley Iles London Pattern, 1/8th and 1/16( I made this one from another 1/8- very well done);(2) highly figured and fiddleback OM size walnut back and sides;(3) S-M router base with circle jig, type 2 and a Foredom handpiece( does not have the little brass edge guide roller assembly- I put it on my Bishop Cochran),(4) Zoot curly maple neck with 5 lams and X-long headstock for 24.9" scale;(5) Rousseau Slam bar Router/Tablesaw etc.Safety switch;,(6) LV tiny rosewood plane pair;(7) LV adjustable scraper burnisher( like Hesh's) and nice wooden scraper holder with two good quality scrapers;(8)1/2" skew chisel pair, Germany;(9)fully fettled Stanley vintage 9 1/2 Std. Angle Block Plane;(10) later Stanley(blue jappanning) #4 bench plane-set up, and very sharp, a fine user.
      I apologize for my computer ineptitude. On the other hand, I am doing the best I can for a good cause. So, from that perspective if you are irritated because I can't post pics as I would like to, then just ignore all of this.And, finally, items not purchased will be sent to Quebec, added to a care package I have started already- it has plenty so don't hesitate on that account. Regards, MT

I HAVE BEEN UNABLE TO RESIZE FOR UPLOAD TO FORUM- HAVE TRIED 3 DIFFERENT PROGRAMS INCLUDING BUYING PAINT SHOP. I CAN EMAIL. MY EMAIL IS IN MY PROFILE. I can re-size for email, so if a member will "host and post" I could send that way.*****PRICES,PRICES,PRICES*******
1=$34.50;2=$75;3=$60;4=$55;5=$17;6=$15pair;7=$34;8=$32 pair;9=$50; 10=$35
    There is no junk here; much is truly new except edged tools that are sharp, but not used.

Email them to me and I'll do it for you in Photoshop.

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com

Thanks Peter. I'll have to do it early tomorrow morning. Best, Mike

Mike,
tomorrow I leave for my "real job" at 7:30 and will be back around 8PM PST

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com

Mike,
I would like the following items -
(6) LV tiny rosewood plane pair
(7) LV adjustable scraper burnisher(
like Hesh's) and nice wooden scraper holder with two good quality
scrapers

Thanks,
Greg Heather
Fort Worth, TX

_________________
GregH
Fot Wuth

Greg-reserved them for you..mt

Paying- I will check with Brock and/or Lance for best way to pay. My suggestion would be Paypal to OLF- then I would certify my total shipping expense to them and they could refund back to me by Paypal. Or, payment to me and I send $$ less shipping to OLF. If that, then checks will be fine with me.mt--PS-I sent pics to Peter, but can't add until this evening. Sorry all.

Mike,

Whatever items are left, if you want you can email them to me at

HateJunqMale at Hotmail dot com

and I will resize them for you and send them back.

Dennis

_________________
Dennis Leahy
Duluth, MN, USA
7th Sense Multimedia

Mike
can you please send me some pics of the {(3) S-M router base with circle jig, type 2 and a Foredom handpiece( does not have the little brass edge guide roller assembly- I put it on my Bishop Cochran}),and (4) Zoot curly maple neck with 5 lams and X-long headstock for 24.9" scale , I may be interested. Thanks-----Snick

Need direct email address.mt

I will take item 4, the Zoot curly maple neck, please.

Please let me know the apprpriate payment method.

Thanks.

Paul

 

Trying photos.OK- how do I link up to the photobucket where I have resized the pics?m

Mike,

 Sorry, here my e-mail

hlasnick@tampabay.rr.com

I am willing to email to individuals. I finally got that to work, ( but can't do it from my office)Mike

Hey Mike,

I only took a quick look before and grabbed the 2 items that immediately hit me. This swap has been great for me since I've picked a lot of items (particularly fine zoot) at prices I couldn't find anywhere else. I think that it's great that you're offering all you proceeds to OLF, so I'll take

(1) The Ashley Iles pattern chisels
(2) The OM Walnut - this better be nice
(5) Rousseau Slam bar Router/Tablesaw etc.Safety switch;
(8)1/2"
skew chisel pair, Germany

Don't need the planes.

Also, I've noticed that a lot of the people on OLF are "subscribers". I thought I saw something about a yearly subscription, but I can't find it now. Do you know anything about that?

Send me a new total. Don't let the computer problems get to ya, I'm an IT deportee and I hate em (but I'm good at it)

Thanks,

Greg

_________________
GregH
Fot Wuth

Photo test

So now you're gonna post pictures.

_________________
GregH
Fot Wuth

So, what do you think of your walnut and chisels? Pretty darn nice don't you think? I dug out a Foredom clone I had laying around and assembled it to the Stew-Mac router base. Looks so good tthat even with the higher price I would have to charge, even if I kept the $, reluctant. So, I haven't decided what to do on it.mt

Yep,

Good photos! I'm happy with the chisels and the walnut, it all looks nice. If I were you, I'd hold on to the Stewmac base and the planes for the next swap meet. Now that the photo posting isn't a problem, I think you'd get a lot more interest.

_________________
GregH
Fot Wuth