***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 8:58 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 2
  [ 34 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
BlackHeart
 Post subject:
PostPosted: Tue Jan 01, 2008 6:18 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Jul 23, 2007 3:46 pm
Posts: 149
Location: United States

I am using a simple technique I figured out because I use HHG and the time factor.


  llllllllllllllllllllllllllllllllllllllllllllllllllllllllllll lllllllllllllllllllllllllllllllllllllllllllllllllllll


  I           ;           ;  I           ;           ;     I           ;        I


(Sorry Im not uploading a pic) 


1.Basicly I set the Kerfing to the height I want DRY and CLAMP


2. Then I glue on little wood spacers to hit the bottom of the kerfing, like 3 or 4, with only a TINY DOT of AR glue near the  top.  1/8th Square X 1/2 inch long


3.Then after I glue and clamp the lining, I take off the glued little sticks using leverage (8 minutes max), hit with hot water rag, glue comes right off.


Perfectly adjusted Kerfing. (Kerfing is the name LMI uses)


Just wondering what everyone else uses, the books I have just say 'glue in lining".


  
Top
 Profile  
 
KenH
 Post subject:
PostPosted: Wed Jan 02, 2008 4:22 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida
Just wanted to bump this one up a little. I use titebond, so I dont have these issues but I am interested in how others handle this.

_________________
Reguards,

Ken H
Top
 Profile  
 
Michael Dale Payne
 Post subject:
PostPosted: Wed Jan 02, 2008 5:46 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
Sounds like a good process. I use to use titebond but now fish glue on my linings, so working time is not much of a issue for me.

We wont go into the whole noun vs. verb issue but dang it I have a good one "liner" reply. (pun intended) said with love in my heart and a grin on my face


Top
 Profile  
 
Steve Saville
 Post subject:
PostPosted: Wed Jan 02, 2008 6:04 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
Why bother with HHG when Titebond. LMI white and Fishglue are so easy and work so well?
What advantage could HHG give you on linings that makes it worth the extra effort?

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.
Top
 Profile  
 
BlackHeart
 Post subject:
PostPosted: Wed Jan 02, 2008 7:18 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Jul 23, 2007 3:46 pm
Posts: 149
Location: United States

[QUOTE=SteveS]Why bother with HHG when Titebond. LMI white and Fishglue are so easy and work so well?
What advantage could HHG give you on linings that makes it worth the extra effort?[/QUOTE]


 


So are you saying HHG could be used on soundboards to get its bennefits, and that the side kerfle (my new word) doesnt matter really what glue you use?


 


SOme HHG guys better back this up!


I think this method would work with any glue, you basicly dont have to fudge around at all, it pops in to the exact height if your careful.
Top
 Profile  
 
BlackHeart
 Post subject:
PostPosted: Wed Jan 02, 2008 7:30 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Jul 23, 2007 3:46 pm
Posts: 149
Location: United States

I notch them so I can get a blade under them. I just had lots of problems with eveness. I also use the "quick glue" for putting a handle on bridge plates, you can graps it and it shoves right in the slot with leverage, then pop off the handle.
Top
 Profile  
 
JJ Donohue
 Post subject:
PostPosted: Wed Jan 02, 2008 7:31 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
[QUOTE=SteveS] Why bother with HHG when Titebond. LMI white and Fishglue are so easy and work so well?
What advantage could HHG give you on linings that makes it worth the extra effort?[/QUOTE]

If your effort in using HHG on kerfed liners is stressing you out then you should use something simpler. And if you don't understand why a glue that sets up to a crystalline, glass hard surface that won't cold flow then use one that sets up with a softer, amorphous surface with a lower durometer and has a tendency to cold flow over time. It's hardly "extra effort" for me anymore but I consider the effort to be worthwhile.

I spread glue on one surface with a brush for about 1/4 of one side length, clamp the suckers and then move on to the next section. It sets up fast and draws the liners into the surface of the sides and doesn't slip around....a real advantage IMO...and that's why I "bother" with HHG. And after 5 years and 8 guitars with 90% of my joints having been made with HHG and NO failures, I'll continue to "bother" to use HHG. Yes...I admit it...I'm a HHG snob!

I feel very relaxed with no stress and with the knowledge that I am using a glue that has stood the test of time since the days of the pyramids. Why do we always seem to have to justify it to those who probably have not taken the time to properly evaluate and learn to use the stuff?

There's always Fish Glue for the faint-hearted! ...Actually a good alternate to HHG and something I plan to use on tops and backs.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com
Top
 Profile  
 
Howard Klepper
 Post subject:
PostPosted: Wed Jan 02, 2008 7:32 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692
[QUOTE=SteveS] Why bother with HHG when Titebond. LMI white and Fishglue are so easy and work so well?
What advantage could HHG give you on linings that makes it worth the extra effort?[/QUOTE]

What Steve said.

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.
Top
 Profile  
 
Hesh
 Post subject:
PostPosted: Wed Jan 02, 2008 9:28 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
What Howard said......

JJ and I have debated this a number of times and what it comes down to in the end, in my view, is what you are most comfortable working with.  JJ has a mastery of HHG application that I don't and he has a track record of no failures. 

I am in the camp that which glue you use to glue on your "kerfed linings" will make no difference one way or the other acoustically speaking.  So I use Titebond and will perhaps use Fish glue too at some point.

I will say though that if your methodology does not permit you to make consistently excellent and timely HHG joints its a mistake to use HHG.
Top
 Profile  
 
Steve Saville
 Post subject:
PostPosted: Wed Jan 02, 2008 9:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
[QUOTE=JJ Donohue] ....if you don't understand why a glue that sets up to a crystalline........   [/QUOTE] Hey HHG snob.   
I understand the difference in glues and how they work. I do not understand how that will make even a small difference on linings to use HHG.
In stressed joints, I get it.
Maybe there is a benefit that I don't understand, but I haven't heard of many stories of lining failures. I don't believe that anyone has done a study to examine the tonal enhancements of HHG vs. Titebond for adhering linings.
Do you think that anyone could hear the difference?

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.
Top
 Profile  
 
Dave Anderson
 Post subject:
PostPosted: Wed Jan 02, 2008 10:09 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
I used HHG on the linings of the guitar I'm building now and had a little difficulty at first until I got it figured out.I agree with JJ on using hide glue.I love the stuff.Like JJ said ,Its a time tested glue and once I got the hang of it ,it's no bother at all.

_________________
Anderson Guitars
Clearwater,Fl. 33755
Top
 Profile  
 
Arnt Rian
 Post subject:
PostPosted: Wed Jan 02, 2008 10:23 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
Compared to fish glue, hide glue is easier to clean up and does not tie up the lining clamps for nearly as long. I have time to wait however, so fish for me! Fish glue also has much higher 'tack' than Titebond, another thing I find benieficial.

_________________
Rian Gitar og Mandolin
Top
 Profile  
 
Arnt Rian
 Post subject:
PostPosted: Wed Jan 02, 2008 10:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
No, its just you

_________________
Rian Gitar og Mandolin
Top
 Profile  
 
James W B
 Post subject:
PostPosted: Wed Jan 02, 2008 11:34 am 
Offline
Koa
Koa
User avatar

Joined: Sat Jul 01, 2006 5:55 am
Posts: 1392
Location: United States
First name: James
Last Name: Bolan
City: Nashville
State: Tennessee
Country: USA
I`m in your camp Todd.Beautifully said.
                James W B

_________________
James W Bolan
Nashville Tennessee
Top
 Profile  
 
JJ Donohue
 Post subject:
PostPosted: Wed Jan 02, 2008 11:42 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Todd...interesting thought but I'm not so sure I agree with your hypothesis. I would imagine that those who use HHG for the vast majority of joints are the same folks who make their own bridges, FB's, necks, headplates, use hand tools, etc.

In my case, I think it's a more relaxed pace of building and an unhurried approach that attracts me to the idea of doing as much as possible and learning as many woodworking skills now that I wish I had learned decades ago! I'm still a novice in so many ways.




_________________
JJ
Napa, CA
http://www.DonohueGuitars.com
Top
 Profile  
 
Todd
 Post subject:
PostPosted: Wed Jan 02, 2008 11:45 am 
Offline
Walnut
Walnut

Joined: Tue Jan 17, 2006 12:37 pm
Posts: 13
Location: Canada
Fish and Hide for everything works fine for me and mine.

Todd
Top
 Profile  
 
Terence Kennedy
 Post subject:
PostPosted: Wed Jan 02, 2008 12:18 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3389
Location: Alexandria MN
Well after much procrastination and with the gentle prodding of all you guys I glued on my first bridge with HG recently.  I had been using LMI white for pretty much everything.  Great stuff! I'm hooked. I'll definitely start using it for joining plates, and top braces.  Wish I'd taken the plunge sooner.
I probably still use LMI for linings though.  I've had no glue related failures with it and it appears to dry rock hard and crystalline.
Terry


_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.
Top
 Profile  
 
BlackHeart
 Post subject:
PostPosted: Wed Jan 02, 2008 1:46 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Jul 23, 2007 3:46 pm
Posts: 149
Location: United States

Ok, well then if you want to use HHG to do the kerfle, use the 'Blackheart Placement sticks". I sell them now for $3.00 a dozen.
Top
 Profile  
 
JJ Donohue
 Post subject:
PostPosted: Wed Jan 02, 2008 4:03 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
[QUOTE=BlackHeart]

Ok, well then if you want to use HHG to do the kerfle, use the 'Blackheart Placement sticks". I sell them now for $3.00 a dozen.

[/QUOTE]

This is a joke...right?

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com
Top
 Profile  
 
WaddyThomson
 Post subject:
PostPosted: Wed Jan 02, 2008 4:10 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Why, JJ, you want some.  Sounds fair to me.



_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars
Top
 Profile  
 
grumpy
 Post subject:
PostPosted: Wed Jan 02, 2008 7:25 pm 
Offline
Koa
Koa

Joined: Wed Aug 22, 2007 11:58 am
Posts: 1667
My work here is done. I proudly pass the scepter to JJ.


.

.

Here's your new avatar, Sir.
Top
 Profile  
 
JJ Donohue
 Post subject:
PostPosted: Thu Jan 03, 2008 1:08 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Hey Mario...you flatter me but I hardly think we've had enough of your personal touch. Nonetheless I'll try the avatar on for size and wear it proudly.

BTW...that's the grumpiest-looking puppy I have ever seen. Is that a new addition and replacement?

...and about those socks lying around...

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com
Top
 Profile  
 
Hesh
 Post subject:
PostPosted: Thu Jan 03, 2008 1:10 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional



Top
 Profile  
 
Dave White
 Post subject:
PostPosted: Thu Jan 03, 2008 1:26 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jul 05, 2005 10:53 pm
Posts: 2198
Location: Hughenden Valley, England
[QUOTE=grumpy] My work here is done. I proudly pass the scepter to JJ.. [/QUOTE]

Mario,

Did you use hhg so stick that pup down? Seems to be working well

_________________
Dave White
De Faoite Stringed Instruments
". . . the one thing a machine just can't do is give you character and personalities and sometimes that comes with flaws, but it always comes with humanity" Monty Don talking about hand weaving, "Mastercrafts", Weaving, BBC March 2010
Top
 Profile  
 
Alexandru Marian
 Post subject:
PostPosted: Thu Jan 03, 2008 1:32 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
i wonder what glues sticks better on a CNCd surface 

_________________
Build log
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 34 posts ]  Go to page 1, 2  Next

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com