***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 22, 2024 7:38 am


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
John Elshaw
 Post subject:
PostPosted: Fri Jan 04, 2008 9:21 am 
Offline
Koa
Koa
User avatar

Joined: Mon Jan 03, 2005 2:40 am
Posts: 993
Location: United States
Hi all, I inadvertantly cracked a side on a guitar while trying to drill the soundport. I guess I didn't reinforce it enough before drilling, plus my side was probably a little thinner than normal here.

Anyhow, the crack and chip are almost invisible when held together by hand. What is the best glue to use for the repair, Titebond, CA, epoxy? The only glue I really don't feel comfortable with yet is HHG. I haven't finished the guitar yet but will use an epoxy pore filler and KTM9 if that makes a difference.

Thanks!

John
Top
 Profile  
 
David Collins
 Post subject:
PostPosted: Fri Jan 04, 2008 10:06 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Dec 03, 2005 10:04 am
Posts: 2060
Any of the above, I'd say. No real stresses, creep risk, serviceability issues - whatever glue bottle is nearest should work fine.

_________________
Eschew obfuscation, espouse elucidation.
Top
 Profile  
 
LuthierSupplier
 Post subject:
PostPosted: Fri Jan 04, 2008 10:33 am 
Offline
Koa
Koa
User avatar

Joined: Sat Jun 24, 2006 12:41 pm
Posts: 975
Location: United States
First name: Tracy
Last Name: Leveque
City: Denver
State: CO
Country: USA
Focus: Build
Status: Amateur
I'm no repair guy, but I thought that CA will stain light colored wood like maple. I had heard that CA on rosewood is no problem, but you may see that ugly yellow stain show up on lighter woods. So I would say if you are using Rosewood, then any of those glues would work. If a light colored wood is used, maybe go with tightbond. Good luck, and a real bummer that you cracked that side. But I'm sure it will be fine once glued.
Tracy

_________________
Tracy
http://www.luthiersuppliers.com
Top
 Profile  
 
TonyFrancis
 Post subject:
PostPosted: Fri Jan 04, 2008 1:50 pm 
Offline
Koa
Koa

Joined: Mon Jul 02, 2007 1:22 pm
Posts: 766

Hide glue. Learn to use it.
Top
 Profile  
 
Doug-Guitar-Buckler
 Post subject:
PostPosted: Fri Jan 04, 2008 2:04 pm 
Offline
Mahogany
Mahogany

Joined: Wed Sep 12, 2007 5:03 pm
Posts: 85
Titebond. Learn to love it.
Top
 Profile  
 
erikbojerik
 Post subject:
PostPosted: Fri Jan 04, 2008 2:09 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jun 16, 2007 3:50 am
Posts: 214
Location: United States
For maple I'd use white glue.  Anything else I'd use CA.


Top
 Profile  
 
Ken Franklin
 Post subject:
PostPosted: Fri Jan 04, 2008 6:38 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Aug 25, 2005 4:49 pm
Posts: 1209
Location: Ukiah, CA
Hide glue.

_________________
Ken Franklin
clumsy yet persistent
https://www.kenfranklinukulele.com
Top
 Profile  
 
joelThompson
 Post subject:
PostPosted: Sun Jan 06, 2008 11:04 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Jul 15, 2007 5:01 am
Posts: 140
Location: United Kingdom
I like titebond for repairs like this.
If you put some on your finger and gently rub it in to th crack with your
finger from the inside of the rib until comes through to the other side .
Clean up the squeeze out etc and apply some tape to apply clamping
presure.
Leave overnight and bobs your uncle invisable repair that will outlast the
guitar.

Joel.
Top
 Profile  
 
Michael Dale Payne
 Post subject:
PostPosted: Mon Jan 07, 2008 1:23 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
Hide or Titebond
Top
 Profile  
 
Dave Anderson
 Post subject:
PostPosted: Mon Jan 07, 2008 1:50 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
Since you don't use hhg,yet I would go with titebond and work
it into the crack as Joel said above.It should be invisible.

_________________
Anderson Guitars
Clearwater,Fl. 33755
Top
 Profile  
 
JJ Donohue
 Post subject:
PostPosted: Mon Jan 07, 2008 2:15 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Fish glue...from experience...virtually undetectable. I've learned to love it thanks to David Collins!

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com
Top
 Profile  
 
stan thomison
 Post subject:
PostPosted: Mon Jan 07, 2008 2:32 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Jan 03, 2005 7:46 am
Posts: 1315
Location: Branson, MO
First name: stan
Last Name: thomison
City: branson
State: mo
Zip/Postal Code: 65616
Country: united states
Focus: Build
Status: Professional
D. all of the above will be fine. used all different times, all worked
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com