Official Luthiers Forum!

If by any chance possible and not too much trouble, can anyone measure the width of the guitar at 270mm (10 inches and a half if you dont have a metric rule) from the 12th fret? I need this to proof the cad i'll be using to cnc a sides mold.....

THANKS!

PS i promise ill buy the plans i need asap and stop posting such silly requests....Sorry if i offended anyone

_________________
Build log

i dont have the plan here with me.
it is at the workshop.
but what i do have here is the tracing i made, which i used to make the mold with.
mine reads 312mm(+ some, less then half a mm).

hope it helps.

Udi.

Thanks a LOT!!

_________________
Build log