Official Luthiers Forum!

One of my larger clients is ramping up production and we need some necks!

As I love you all, I of course want to get quotes from any wood dealers on the OLF on this.

The dimensions:
1 5/8" x 3 5/8" x 28"
1.625" x 3.625" x 28"
Straight and clear
The finished product requires a blank 1.5"x3.5"x27.5" dead straight and clear
The mahogany needs to be quartered, the maple doesn't

The numbers:
Hard maple : 100 and 400
Curly maple : 100 and 400
Honduran Mahogany : 250 and 1000

This is an ongoing relationship with this client, so there will be periodic re-orders for the foreseeable future (though they might be looking for something to replace the mahogany a few orders down the line...). Feel free to express interest or ask questions here, but e-mail or PM the actual numbers to avoid potential issues. This is relatively time-critical, so I need numbers (or at least bounds) ASAP. Thanks!

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services

I'm bumping this one. I need numbers by Sunday evening at worst if any of you are interested.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services

bob, I sent you a PM on this.. did you get it?

_________________
Reguards,

Ken H

by the way, here is another one for you

Robert (Bob) Griffin. His phone number is 573-581-3190.

_________________
Reguards,

Ken H

Those guys are definitely getting a call tomorrow, I've gotten loads of quotes on the maple but the mahogany is a bit of a problem (and only set to get worse)!

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services