Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Refinish over Tru-Oil?

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

jsimpson

Post subject: Refinish over Tru-Oil?

Posted: Mon Jul 14, 2008 11:16 am

Cocobolo

Joined: Sun Feb 04, 2007 3:48 pm
Posts: 151
Location: United States

Has anyone refinished with nitro over an old Tru-Oil finish? I'd think it would be best to strip/sand back to bare wood, then prep for nitro finish and shoot as usual...but are there residues left behind that would mess up a nitro finish?

Top

Laurent Brondel

Post subject: Re: Refinish over Tru-Oil?

Posted: Mon Jul 14, 2008 2:58 pm

Contributing Member

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States

The solvent in nitro (lacquer thinner) will soften, curl and make a sticky mess out of any kind of oil-based varnish. You could try to shoot of pad a couple of coats of shellac over the Tru-oil (try on scrap first…), or scrape it off…

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/

Top

Page 1 of 1

[ 2 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 51 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: