Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Craftsman CompuCarve

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Pat Hawley

Post subject: Craftsman CompuCarve

Posted: Mon Aug 18, 2008 9:20 am

Koa

Joined: Mon Oct 08, 2007 2:31 am
Posts: 936
Location: Ottawa, Canada

The last time I was in the US, I stopped in a Sears to browse tools (Sears Canada doesn't carry all the tools available in the States) and I was intrigued by the Craftsman CompuCarve. Here's a link to its description:

http://www.sears.com/shc/s/p_10153_1260 ... 26+Shapers

This looks like inexpensive CNC to me. Does anyone have any experience with it?

Pat

_________________
There are three kinds of people:

Those that make things happen,
those that watch things happen,
and those that wondered what happened.

Top

Michael Dale Payne

Post subject: Re: Craftsman CompuCarve

Posted: Mon Aug 18, 2008 9:58 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

I tried one out at our local sears during demo days. If you want to do flat panel carving. it is OK but for really precision CNC work it is short on power width and software versatility. It is what it is, a small piece simple CNC panel carver.

Top

Page 1 of 1

[ 2 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 41 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: