Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

14 Fret Slotted Necks

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

Mike OMelia

Post subject: 14 Fret Slotted Necks

Posted: Sun Sep 07, 2008 12:37 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

Anybody know where I can find a 14 fret, slotted neck, dovetail? I just found out Martin does not make this anymore. 25.4" scale length.

Mike

Top

Ricardo

Post subject: Re: 14 Fret Slotted Necks

Posted: Sun Sep 07, 2008 1:51 pm

Koa

Joined: Wed Apr 18, 2007 6:46 am
Posts: 1012
Location: Issaquah, Washington USA

check out www.hanalei-moon.com for custom necks.

_________________
A higher purpose for wood.
Rich Smith
Issaquah, WA

Top

Mike OMelia

Post subject: Re: 14 Fret Slotted Necks

Posted: Mon Sep 08, 2008 10:12 am

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

Guess I will attempt my first neck project...

Top

Mike OMelia

Post subject: Re: 14 Fret Slotted Necks

Posted: Mon Sep 08, 2008 8:10 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

Any tips?

I am thinking of using one of the large neck blanks & heel blocks from Allied Lutherie (mohagony).

I know nothing about this process... but tools are available. Do you cut the neck, then glue a heel block to it?

Do I sound clueless? Cause I am. I want a 14 fret slotted peghead neck. Don't want to pay $250-$300 for a custom neck (my guess). Even if I do spend $300, this way I end up with the knowledge and the tools.

I might split the neck block and insert a ply of bubinga! Whadya think? Should be more dimensionaly stable too.

Mike

Top

RaymundH

Post subject: Re: 14 Fret Slotted Necks

Posted: Mon Sep 08, 2008 9:19 pm

Cocobolo

Joined: Tue Jan 29, 2008 9:43 am
Posts: 310
Location: N.B. Canada

Mike,

Chris at Hanalei Moon made me a wonderful solid mahogany 14 fret, 24.9 scale slothead neck for my L-00 "style" project.
It was reasonably priced and no where near the price you stated in your post. Drop him an e-mail and I'm sure you will be pleasantly suprised.

Ray

_________________
Guitar Building = Continuous Improvement Process

Top

Mike OMelia

Post subject: Re: 14 Fret Slotted Necks

Posted: Tue Sep 09, 2008 7:06 am

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

OK... will do.

Mike

Top

Pat Foster

Post subject: Re: 14 Fret Slotted Necks

Posted: Tue Sep 09, 2008 5:07 pm

Contributing Member

Joined: Sat May 17, 2008 1:11 pm
Posts: 2375
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build

An excellent article by Mario Proulx in a recent issue of Guitarmaker shows his methods.

Pat

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com

Top

Mike OMelia

Post subject: Re: 14 Fret Slotted Necks

Posted: Tue Sep 09, 2008 9:55 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

Although I want to learn, I cannot turn down Chris's offer at Hanalie-Moon. VERY reasonable... Thanks for the tips all.

Mike

Top

Page 1 of 1

[ 8 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: rbuddy and 30 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: