Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 5:12 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Mon Jan 05, 2009 2:35 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Again, just a survey question. Where do you like to set the string height on Fender style guitars?

I'm currently using the Fender setup guide suggested height of 1.6mm above the 17th fret on all strings. It isn't as comfortable as I'd like it to be.


Top
 Profile  
 
PostPosted: Mon Jan 05, 2009 2:55 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
James...one of the best parts about working on electrics is the ability to mechanically adjust saddle height. Just keep experimenting until you find your sweet spot.

I've never even measured string height on the ones I made for my sons...I just keep adjusting until I see the smile on their faces.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
PostPosted: Tue Jan 06, 2009 11:01 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Jan 30, 2008 2:03 am
Posts: 198
Location: USA
First name: Brett
Last Name: Faust
City: Puyallup
State: WA
Zip/Postal Code: 98373
Country: USA
Focus: Build
Status: Professional
Hi James and everyone,
As I remember the 17th fret is for genuine Fenders, but most Fenders do not have fallaway above the 12th fret.This can be misleading in a guitar with fallaway built in ,leading to action that is set too low for most of the neck.I set mine for a starting place of 3/64" on treble side 4/64" for the bass side @ the 12th fret.I adjust down from there depending on player preference.I insist that the high E string be able to bend cleanly 1.5 steps or more. A 7.25" radius makes things a little tricky to go much lower with 10s,but it can be done.

_________________
How long is that in luthyears?


Top
 Profile  
 
PostPosted: Wed Jan 07, 2009 8:57 am 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 26, 2008 12:31 pm
Posts: 510
Location: Gaithersburg MD
First name: Erik
Last Name: Hauri
State: Maryland
Focus: Build
Status: Amateur
I use a 7-string set starting at 10s but with the wound-D removed, so my E-A-D are all about 0.010" thicker than normal for higher tension and ease of drop-tuning. AND I'm a mad down-stroker, so my action is 3-sigma higher than almost everyone else I run into.

Long story short - action depends a LOT on the player's playing style.

_________________
The member formerly known as erikbojerik....


Top
 Profile  
 
PostPosted: Wed Jan 07, 2009 3:56 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Very cool. Thanks guys!

Brett, I wonder how much work you did on my current strat? [:Y:]


Top
 Profile  
 
PostPosted: Fri Jan 09, 2009 3:03 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Brett L Faust wrote:
I set mine for a starting place of 3/64" on treble side 4/64" for the bass side @ the 12th fret.

[:Y:]It feels like a new, better guitar [:)]

It looked like I had it .02" higher, so .08" total. What a difference 20 thousandths of an inch can make. Thank you!


Top
 Profile  
 
PostPosted: Fri Jan 09, 2009 6:42 am 
Offline
Cocobolo
Cocobolo

Joined: Wed Jan 30, 2008 2:03 am
Posts: 198
Location: USA
First name: Brett
Last Name: Faust
City: Puyallup
State: WA
Zip/Postal Code: 98373
Country: USA
Focus: Build
Status: Professional
Your welcome James, I hope it plays clean .It sounds like you have found the sweet spot for this guitar.
I probably did most of the final work on your neck but it really is a team effort.I have some very talented guitarheads working with me.

_________________
How long is that in luthyears?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com