***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 6:43 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
John How
 Post subject:
PostPosted: Tue Jan 25, 2005 7:57 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 03, 2005 7:40 am
Posts: 2694
Location: United States
First name: John
Last Name: How
City: Auburn
State: Ca
Country: USA
Hey it appears that the link is working again.
Try this Ryan neck videosLanceK38377.6756828704

_________________
Tickle your guitar daily, and it'll tickle you back.
Top
 Profile  
 
LanceK
 Post subject:
PostPosted: Tue Jan 25, 2005 8:13 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
John, I edited your post, the url had HTTP:// twiceLanceK38377.6766319444

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
John How
 Post subject:
PostPosted: Tue Jan 25, 2005 8:21 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 03, 2005 7:40 am
Posts: 2694
Location: United States
First name: John
Last Name: How
City: Auburn
State: Ca
Country: USA
Thanks Lance

_________________
Tickle your guitar daily, and it'll tickle you back.
Top
 Profile  
 
JJ Donohue
 Post subject:
PostPosted: Tue Jan 25, 2005 8:50 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Very cool!!! Thanks for posting, John.

How much time does it take most guys to fashion a neck It took at least 80 interrupted hours for me to do this operation with a spokeshave, files, chisels and hand sanding.

He obviously is one step below CNC speed. While I'll never be this efficient nor have so much equipment, his jigs, fixtures and gauges are something anybody could build to improve their skills.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com
Top
 Profile  
 
Mattia Valente
 Post subject:
PostPosted: Tue Jan 25, 2005 9:12 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Jan 05, 2005 6:25 pm
Posts: 2749
Location: Netherlands
Roughing in a neck with rasps, spokeshaves, files takes me about an hour, hour and a half. The heel itself takes a good 2 hours, though. Rest of the blank kinda depends on the initial state of the wood.
Top
 Profile  
 
John How
 Post subject:
PostPosted: Tue Jan 25, 2005 9:18 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 03, 2005 7:40 am
Posts: 2694
Location: United States
First name: John
Last Name: How
City: Auburn
State: Ca
Country: USA
I recently finished a couple of new neck jigs, One that shapes the tenon and one that shapes the heel contour (the sides of the heel). This speeds up neck shaping considerably. I also use my new airpowered handheld drum sander which I'm still getting comfortable with. You have to be carefull with that thing, it can be agressive if you let it. Then I go to rasps and sanding blocks of various shapes including spindles of different sizes on dowel handles. I think shaping a neck takes me about 2 to 3 hours and that does not include anything but the actual shaping of the neckshaft and heel. John How38377.7218055556

_________________
Tickle your guitar daily, and it'll tickle you back.
Top
 Profile  
 
John Mayes
 Post subject:
PostPosted: Tue Jan 25, 2005 10:54 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jan 08, 2005 3:37 am
Posts: 2670
Location: United States
First name: John
Last Name: Mayes
City: Norman
State: OK
Focus: Build
Status: Professional
I have been recently making necks very similar to ryan (tools wise) with a high speed Porter cable pnuematic sander and files, but I also use the belt sander some too. It would take me about 2 hours to do what Kevin did there taking it from a rough assembled neck to fully carved.

_________________
John Mayes
http://www.mayesluthier.com
Top
 Profile  
 
stan thomison
 Post subject:
PostPosted: Tue Jan 25, 2005 12:34 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jan 03, 2005 7:46 am
Posts: 1315
Location: Branson, MO
First name: stan
Last Name: thomison
City: branson
State: mo
Zip/Postal Code: 65616
Country: united states
Focus: Build
Status: Professional
john are you still using for lack of better word or description that huge "helocopter" bit on the shaper
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 33 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com