Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 22, 2024 11:43 am


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sat Sep 11, 2010 5:13 pm 
Offline
Walnut
Walnut

Joined: Sat Sep 11, 2010 4:47 pm
Posts: 3
First name: Peter
Last Name: Cunningham
Country: USA
Focus: Build
Status: Amateur
I just started a rosewood 000 from stewmac and I'm excited!

I noticed an issue with the X braces though - it doesn't have the same radius as the plans, or as the Dreadnaught braces. Is this ok, or should I try to shape the radius to match the plans? One side clearly has a radius on it but it's not tight enough.

Thanks,
Peter


Top
 Profile  
 
PostPosted: Sat Sep 11, 2010 6:02 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Apr 17, 2007 3:50 am
Posts: 305
Location: Central Washington United States
A picture is always good. Not sure what you mean by radius. Check the way you are putting the braces together.

_________________
Wisdom is justified by her children


Top
 Profile  
 
PostPosted: Sat Sep 11, 2010 6:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2968
Location: United States
If the radius is off you can either match the radius to you dish, or if it's not off terribly far you can (light hand pressure makes it conform) you can simply flex it in when gluing. If you flex it in while glue give yourself some extra clamp time to help minimize spring back.

_________________
Jim Watts
http://jameswattsguitars.com


Top
 Profile  
 
PostPosted: Sat Sep 11, 2010 6:36 pm 
Offline
Walnut
Walnut

Joined: Sat Sep 11, 2010 4:47 pm
Posts: 3
First name: Peter
Last Name: Cunningham
Country: USA
Focus: Build
Status: Amateur
Hopefully these will clarify. Is this close enough to bend, or should I shave off some wood and try to match the radius?


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Sep 11, 2010 6:59 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2968
Location: United States
I thought the braces were pre-scalloped. I would check them against the radius dish, assuming you're using one, not the drawing.
If they're that far off and 5/8 tall, I'd match the brace to my radius dish.

_________________
Jim Watts
http://jameswattsguitars.com


Top
 Profile  
 
PostPosted: Sun Sep 12, 2010 6:21 pm 
Offline
Walnut
Walnut

Joined: Sat Sep 11, 2010 4:47 pm
Posts: 3
First name: Peter
Last Name: Cunningham
Country: USA
Focus: Build
Status: Amateur
The X braces for the 000 kit aren't scalloped; everything else is. I'm not using a radius dish, but I think the drawing should be correct, especially if it matches the dreadnaught x brace (which it includes for comparison).


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com