Official Luthiers Forum! • View topic

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours

Neck Through Blank

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Ian Cunningham

Post subject: Neck Through Blank

Posted: Sat Sep 25, 2010 10:36 pm

Koa

Joined: Tue Apr 27, 2010 9:07 pm
Posts: 512
City: Tucson
State: AZ
Country: USA
Focus: Build
Status: Amateur

I'm looking for a neck blank that would be suitable for a neck through body short scale bass. 40"x2.5"x3" I think would be suitable. If I have to use several pieces to get the desired width that is absolutely fine. I'd prefer Spanish Cedar or any Mahogany variant. Good Sapele would do nicely I think. Please PM me if you are a wood dealer and have something on hand that would be suitable.

I am aware that Stewmac sells neck through blanks. Just wanted to get that out of the way. I am only interested in raw wood, milled or otherwise, and the grain should, of course be right for a neck.

Top

theguitarwhisperer

Post subject: Re: Neck Through Blank

Posted: Sun Sep 26, 2010 10:00 am

Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional

Go to Weiss Hardwoods in Clearwater. They have exotics, and stuff.

_________________
Old growth, shmold growth!

Top

Page 1 of 1

[ 2 posts ]

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 63 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: