***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 2:18 am


Board index » CNC and Lutherie

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
Stuart Gort
 Post subject: Finsihed the Bridge
PostPosted: Thu Oct 28, 2010 7:36 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
Mostly I'm just goofing around trying to get better close-up shots.

Here's a few pictures of the bridge assembly.


You do not have the required permissions to view the files attached to this post.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic
Top
 Profile  
 
John A
 Post subject: Re: Finsihed the Bridge
PostPosted: Thu Oct 28, 2010 7:47 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Sep 24, 2009 9:50 am
Posts: 941
Location: Ellicott City, Md - USA
First name: John
Last Name: A
Focus: Build
Status: Amateur
I need a robot.


That's awesome - how long does it take to make a complete bridge ?

_________________
It's this new idea from recent decades that everyone gets a participation award. - MUX
Top
 Profile  
 
turmite
 Post subject: Re: Finsihed the Bridge
PostPosted: Thu Oct 28, 2010 9:08 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 09, 2008 2:39 am
Posts: 519
Stuart, that is absolutely stunning! I almost posted in your other thread today that it was time for an update!

Mike
Top
 Profile  
 
Jim Watts
 Post subject: Re: Finsihed the Bridge
PostPosted: Thu Oct 28, 2010 9:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2969
Location: United States
Nice job, I like your string saddles!

_________________
Jim Watts
http://jameswattsguitars.com
Top
 Profile  
 
Stuart Gort
 Post subject: Re: Finsihed the Bridge
PostPosted: Thu Oct 28, 2010 10:34 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
John A wrote:
How long does it take to make a complete bridge ?


There's actually another part....a brass block that fits into a recess on the back of the guitar where the string endballs are constrained. All told it's a little over an hour and a half machining per bridge....not counting the setups.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic
Top
 Profile  
 
Saul Koll
 Post subject: Re: Finsihed the Bridge
PostPosted: Fri Oct 29, 2010 3:29 pm 
Offline
Mahogany
Mahogany

Joined: Mon Aug 20, 2007 2:25 pm
Posts: 53
Location: United States
Looking good!
Thanks for posting those.
Top
 Profile  
 
Mike Kroening
 Post subject: Re: Finsihed the Bridge
PostPosted: Sat Oct 30, 2010 11:11 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 04, 2008 10:55 pm
Posts: 404
Location: Dallas, Texas
Stuart, how much for one of these?
Mike

_________________
I'm outside looking in, just farther from the window than most.
Top
 Profile  
 
peterm
 Post subject: Re: Finsihed the Bridge
PostPosted: Sat Oct 30, 2010 8:35 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
Mike Kroening wrote:
Stuart, how much for one of these?
Mike


yep, how much? [clap]

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com
Top
 Profile  
 
Stuart Gort
 Post subject: Re: Finsihed the Bridge
PostPosted: Sat Oct 30, 2010 10:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
That's flattering guys but I don't intend to sell these bridges except on my guitars. :) If I did sell them, based on the cycle time and material costs they would cost north of $140...maybe higher...which may seem expensive until you compare it with anything similar. I haven't yet seen a bridge that was fully machined because to make and sell thousands of them a month...machining them entirely from raw stock isn't very practical.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » CNC and Lutherie

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com