Official Luthiers Forum! • View topic - Which CAM software

Board index » CNC and Lutherie

All times are UTC - 5 hours

Which CAM software - "carved" archtop

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

d1camero

Post subject: Which CAM software - "carved" archtop

Posted: Mon Nov 29, 2010 9:50 am

Walnut

Joined: Sun Apr 29, 2007 11:45 am
Posts: 23

Hey gang, I have been using my CNC for other (non-guitar) work for a few years, and it has all been flat 2D operations. Now I want to build an archtop. No problem with me modelling the top/bottom carved top and back in my CAD tool - but which CAM software? I see a few use Cut3D or Aspire. Since this is just a hobby I want to keep costs down. Anyone use SheetCAM or MeshCAM, etc.?

What do you use for 3D CAM?

Top

Bob Garrish

Post subject: Re: Which CAM software - "carved" archtop

Posted: Mon Nov 29, 2010 2:18 pm

Brazilian Rosewood

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional

If you've already got 2D handled, and you only want to carve a top, then all you need is a parallel 3D finish pass. Freemill is a cut-down version of Visual Mill that includes only that feature, so you don't need to spend a cent!

http://www.mecsoft.com/freemill.shtml

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services

Top

d1camero

Post subject: Re: Which CAM software - "carved" archtop

Posted: Mon Nov 29, 2010 8:58 pm

Walnut

Joined: Sun Apr 29, 2007 11:45 am
Posts: 23

That works! thanks!

Top

Page 1 of 1

[ 3 posts ]

Board index » CNC and Lutherie

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 23 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: